when you buy headers for our cars do most of them come with the little tube that connects to our EGR, its like that little extra tube that comes off the passenger side header and goes up to the intake manifold. i was lookin at maybe some mac headers or somthin but was wondering if they all came with it or just certain brands. thanks
header question
- Thread starter cb18201
- Start date
also does anyone know about this? the egr delete http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33607&item=7909256143&rd=1
would it throw a check engine light or make our cars run like crap?
would it throw a check engine light or make our cars run like crap?
JJ95GTID
Active Member
Don't know about any of the other brands but the BBK E/L I got did come with the tube to hook up the EGR. As for removal of the EGR valve I am pretty sure that most of the folks here that can have done so w/o throwing a MIL code.
bjl95mustang
Founding Member
I believe the only difference between the fox headers and the 94-95 headers is the egr tube bung on the pass header. The only wayto delete your egr without getting a cel is to use a chip or twecer, or you can remove the sensor on the egr and rig the plunger half way between open and close and the just tuck the sensor behind the intake.
Similar threads
