• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

heads and cams need help

  • Thread starter Thread starter 2004blackauto
  • Start date Start date Mar 5, 2010
2

2004blackauto

New Member
Mar 2, 2010
5
0
0
Mar 5, 2010
#1
  • Mar 5, 2010
  • #1
looking to start making mods to my 04 gt with 28000 miles and auto trans
was thinking about a s/c but think ill just do heads and cams summit has a kit from trick flow with heads and stage one cams how much increase can i expect from this kit. would like to stick with stock malfolds dont want long tubes , i know the make the power. was leaning towards 4.10s in the rear i always thought stage one cams didnt give much of an increase in power. would i be better to use these heads with stage 2 cams how much rear wheel power can i expect to make the car is bone stock for now btw who does the best dyno tune work near tampa fl thanks for any help mark
 

84Ttop

They make new pistons every day, so why worry?
5 Year Member
Jul 2, 2009
5,222
3,255
204
South Jersey
Mar 5, 2010
#2
  • Mar 5, 2010
  • #2
Best bang for the buck is the supercharger. Will you be doing the upgrades yourself? For around the same money as the h/c and labor you should be able to do a vortech sq and labor and make a much bigger gain.
 
2

2004blackauto

New Member
Mar 2, 2010
5
0
0
Mar 5, 2010
#3
  • Mar 5, 2010
  • #3
thats what i was thinkin but have heard of a few guys popin there motors esp when it gets cool out and it leans out my car has 29000 miles tring to get the most safe horse power without making the car unfit to drive where ever long or short dist.
 
N

ninjastang125

New Member
Nov 1, 2008
591
2
0
maryland
Mar 6, 2010
#4
  • Mar 6, 2010
  • #4
A blower with a stock bottom end will be fine as long as you don't try to push it. If you are going with heads I would go trickflow if you have the coin and cams I would go with cms stage 2 na cam. Cms has a package deal on their website too.
 

Rickyll7

Member
Dec 16, 2005
718
4
19
Mar 6, 2010
#5
  • Mar 6, 2010
  • #5
2004blackauto said:
thats what i was thinkin but have heard of a few guys popin there motors esp when it gets cool out and it leans out my car has 29000 miles tring to get the most safe horse power without making the car unfit to drive where ever long or short dist.
Click to expand...

Superchargers don't lean out engines, bad tunes and inadequate equipment do.
 
You must log in or register to reply here.

Similar threads

F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
506
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
W
HP and tq
  • www.davisjason0521@gmail.
  • Mar 30, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
233
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 1, 2025
gkomo
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Ford truck engine swap issues
  • keel
  • Jul 7, 2026
  • Other Auto Tech
Replies
17
Views
788
Other Auto Tech Jul 13, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?