• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

heater core - where to buy

  • Thread starter Thread starter Iwantmyoldname
  • Start date Start date May 18, 2006
I

Iwantmyoldname

New Member
Sep 9, 2005
14
0
0
NY/PA
May 18, 2006
#1
  • May 18, 2006
  • #1
Should I buy the OEM ford part I found it for $45. Autozone has one which is made by transpro for $28. Napa has one for $23. I just don't want to do this job more than once.

Thanks
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
May 18, 2006
#2
  • May 18, 2006
  • #2
Ford OEM. The largest majority of folks who've swapped them have had better luck with the Ford part.

Make sure you remove ALL the old sticky-goo from the air box before you intall the new core.
 
M

myshifter

Banned
May 18, 2006
13
0
0
May 18, 2006
#3
  • May 18, 2006
  • #3
Do you live in a warm climate? If so I would trash can the heater core immediately. I did 3 of them and finally trashed it.
 
I

Iwantmyoldname

New Member
Sep 9, 2005
14
0
0
NY/PA
May 18, 2006
#4
  • May 18, 2006
  • #4
No I live in long island. My mustang is not my daily driver so I could trash the heater core but I think I'd like to have it just in case.

Thanks.
 

7-UP BILL

Founding Member
Jan 4, 2001
885
19
49
My other car is a Firetruck
May 18, 2006
#5
  • May 18, 2006
  • #5
Remember, by trashing the heater core you also lose the defroster. Something to think about. If you choose to do it, I would buy the Ford piece. "After the thrill of the low price is gone..."
 

rd

Founding Member
Jan 12, 2000
3,316
63
109
Ocean Springs MS
May 18, 2006
#6
  • May 18, 2006
  • #6
I'd go get the closest parts store one. Carquest in my case mostly. I have had a Ford unit fail in all 3 of my Foxes. And one aftermarket unit. Does not seem to matter, I think the tube and core size, combined with a hot/cold environment, vibration and chemicals just kills the little suckers.
 
8

8950HO

New Member
Mar 31, 2005
658
2
0
May 18, 2006
#7
  • May 18, 2006
  • #7
Get one from the Ford dealer.

I replaced my heater core 2 weeks ago...(f`n major pita btw).

I last did the job 8 years ago using a NAPA heater core.

The Ford heater core has thicker tanks and thicker inlet/outlet pipes compared to the old NAPA heater core.
 
You must log in or register to reply here.

Similar threads

Engine Bleeding air in the heater core
  • keel
  • Apr 2, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
243
Fox 5.0 Mustang Tech Apr 23, 2026
limp
M
2001 evap/heater core questions
  • mnky99
  • Sep 3, 2025
  • SN95 V6 Mustang Tech
Replies
3
Views
313
SN95 V6 Mustang Tech Sep 3, 2025
mnky99
M
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
503
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
M
2001 v6 heater hose quick connect question
  • mnky99
  • Sep 24, 2025
  • SN95 V6 Mustang Tech
Replies
8
Views
576
SN95 V6 Mustang Tech Sep 26, 2025
mnky99
M
M
  • Locked
2001 evap core tube support
  • mnky99
  • Sep 4, 2025
  • SN95 V6 Mustang Tech
Replies
4
Views
340
SN95 V6 Mustang Tech Sep 5, 2025
mnky99
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?