HELP! 1996 mustang 4.6 radiator (cooling) fan problems

"...I have to go play with the conector to the fan motor..."

Have you carefully examined the wiring and connector pins here for corrision, fatigue in the wires, bad connections etc?

kingme50000 said:

Also when it does come on, it doesn't come on until the temperature gauge reaches the M in NORMAL. .

Click to expand...

Going to go out on a limb here. Your low speed fan is not working. Use a jumpper wire directly to the battery to test. Confirm BOTH speed fans work. There is an obvious speed difference between the low and high speed fans.

kingme50000 said:

I have to go play with the conector to the fan motor until comes on.

Click to expand...

+1 on what trinity_gt said. Great advice. Remember that the fans use A LOT of power. This requires a solid electrical connection. Not a bad idea to check the fan ground.

Once both speed fans have been confirmed good AND the connector is in perfect shape additional trouble shooting is in order. Additional trouble shooting just doesn't make sense until this has been done.

If just the low speed fan doesn't work, check the aux fan circuit breaker located in the small right hand engine bay fuse box.

The coolant crossover is part of the intake. They can not be serviced separately. Good luck fixing with RTV.

Search the forums. TONS of ppl have had the coolant cross over crack and leak. Esp on the all plastic intake.

TONS of ppl have replaced their own intake manifolds and there are many write ups and how to articles. Take pictures. Let me repeat. Take pictures as the work is done.

It took me 4 hours to change mine. Work slow and take your time. Do your homework so that you understand the job.

The Dorman intake manifold is a good stock replacement. Well made. Includes gaskets. Search Amazon.com:

Dorman OE Solutions Intake Manifold 615-178 $198.38

OBTW, if there is a coolant leak, air tends to collect in the cross over. This causes the sensor to contact air instead of coolant. As result, the sensor always reads low. No mention was made of coolant use or coolant leak in the original post.

Good luck.

FWIIW, no one will drop another all plastic intake on your car unless it is a salvage unit. No one makes an all plastic unit anymore.

Consider that if you buy the part, most mechanics will not guarantee the job. But it pays to ask around.