- Nov 12, 2005
- 59
- 0
- 0
I just flushed the system, changed all the hoses, put a new Mr gasket 180* thermostat, and new radiator cap in. Now the car wont heat up. I drove it around for awhile and got out and there was no fluid in the upper hose, I could squeeze it together.
It wont go past 130 on the OEM gauge. I tested the thermostat prior to instalation but confused. Am i supposed to actually see it open or are bubble supposed to come out. The only other thing I could think of is the radiator, or something else is plugged up along the way:damnit:
A side note, I put a full gallon of distilled water in, then tried to put a gallon of antifreeze in but it would not take it, only took about half of it??
It wont go past 130 on the OEM gauge. I tested the thermostat prior to instalation but confused. Am i supposed to actually see it open or are bubble supposed to come out. The only other thing I could think of is the radiator, or something else is plugged up along the way:damnit:
A side note, I put a full gallon of distilled water in, then tried to put a gallon of antifreeze in but it would not take it, only took about half of it??