Help identify brake calipers on my fox

D

Dubsantana

New Member

Mar 17, 2020

19

1

1

California

Mar 17, 2020

#1

• Mar 17, 2020

• #1

Please help I have an 89 mustang 5.o 5 lug I think the front brakes are from a newer mustang but 1 guy said the rears look like there off Lincoln and I need replace brakes and rotors and want to try to narrow it down to save some trips to store. Pictures are the rears are the ones covered in rust the other picture is of the fronts

 

Attachments

• 20200315_121331.webp

  121.9 KB · Views: 162
• 20200315_121310.webp

  71.7 KB · Views: 151

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,248

17,929

224

Massachusetts

Mar 17, 2020

#2

• Mar 17, 2020

• #2

Rears are SVO/Mark7

Front...unknown. Do you have a pic from a little bit back? That photo is too close to get a sense for them. They don’t look like newermustang

 

Reactions: Dubsantana

D

Dubsantana

New Member

Mar 17, 2020

19

1

1

California

Mar 17, 2020

#3

• Mar 17, 2020

• #3

 

D

Dubsantana

New Member

Mar 17, 2020

19

1

1

California

Mar 17, 2020

#4

• Mar 17, 2020

• #4

So on the rears that's the pads and rotors I can use?

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,248

17,929

224

Massachusetts

Mar 17, 2020

#5

• Mar 17, 2020

• #5

94-98 GT front brakes

84-86 SVO rear brakes

 

Reactions: Dubsantana

D

Dubsantana

New Member

Mar 17, 2020

19

1

1

California

Mar 17, 2020

#6

• Mar 17, 2020

• #6

Mustang5L5 said:

94-98 GT front brakes

84-86 SVO rear brakes

Click to expand...

If I wanted them to be the same what would be the easiest to do? Is there some calipers that would mount the same? Thank you for all the help

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,248

17,929

224

Massachusetts

Mar 18, 2020

#7

• Mar 18, 2020

• #7

Dubsantana said:

If I wanted them to be the same what would be the easiest to do? Is there some calipers that would mount the same? Thank you for all the help

Click to expand...

Ditch the rear setup and install 94-98 rear sn95 disk brakes.

It will require pulling the axle shafts out and installing new brackets. You can probably reuse your axles but you’ll need to pull them out and physically measure them

 

Reactions: Dubsantana