• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Help me build a combo

  • Thread starter Thread starter DmnStr8
  • Start date Start date Oct 16, 2005

DmnStr8

Member
Apr 16, 2005
0
0
16
NH
Oct 16, 2005
#1
  • Oct 16, 2005
  • #1
I have a set of ported gt40 irons that are clean and just about ready to go. I just need rockers for them. This winter I'm going to be working on saving for the rest of the h/c/i.

What are some combo's I could do and about what can I expect for performance. Was looking for low 13's are high 12's.

Right now I'm thinking. Cobra or TMOSS intake, 65mm TB, 76mm MAF, and then maybe a cam, or 1.7's or both depending on how money is. I'm on a tight budget so I really can't gio all out and most likely will be going used on most things.

Thanks
 

95COBRA241

New Member
Sep 3, 2005
339
0
0
Delray Beach, FL
Oct 16, 2005
#2
  • Oct 16, 2005
  • #2
A ported Cobra, GT40, or Explorer intake with a 65mm TB and 76mm MAF will work with the heads. For a cam you'll have do some searching and or speak to a custom grinder. Cam selection should decide which rocker ratio to go with and not the other way around.
 

DmnStr8

Member
Apr 16, 2005
0
0
16
NH
Oct 17, 2005
#3
  • Oct 17, 2005
  • #3
Yeah i figured that. I was just not sure if I would stick with the stock cam or get an aftermarket. Money will be the deciding factor i guess
 
S

STONECOLD

New Member
Mar 31, 2003
7
0
0
N.Y.C.
Oct 17, 2005
#4
  • Oct 17, 2005
  • #4
The GT-40 intake is big enough to accommodate a 70mm if you happen to chose that intake.
 
I

IntenseBlue

Member
Jul 10, 2005
946
0
16
Oct 17, 2005
#5
  • Oct 17, 2005
  • #5
Cobra intake and Ecam or TFS Stage 1 with 1.6 rockers.
 

DmnStr8

Member
Apr 16, 2005
0
0
16
NH
Oct 17, 2005
#6
  • Oct 17, 2005
  • #6
I keep being told that there are better cams then the e cam. But I know nothing about how to pick a cam. Where should i look to learn?

Thanks guys keep me coming. I need stuff to daydream about.
 
F

FiveOfastback

New Member
Dec 25, 2004
32
0
0
Bethlehem, pa
Nov 5, 2005
#7
  • Nov 5, 2005
  • #7
Comp 266 HR will get you in the high 12 if you can get the car to hook up decent. Just watch valve clearance with this cam or any thing bigger especially if using 1.7 rockers.
 

jackchan

New Member
Oct 17, 2004
507
0
0
Mobile Alabama
Nov 5, 2005
#8
  • Nov 5, 2005
  • #8
if it were me I'd leave stock cam in, and get an used explorer intake and leave it stock.(unported)...convert the 65mm tb from the explorer over and run it on your stang, maybe pick up a used 75mm pro m bullet mass air meter calibrated to your injectors, or find a good pair of cheap used #24's....... . And maybe stick on some 1.7 rockers if there was funds availble to do so. with your gear, if you have traction you should be in the high twelves all day long!
good luck
Jack
 
You must log in or register to reply here.

Similar threads

A
Discussion on mild budget build/ top end
  • Acesario
  • Feb 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 23, 2026
General karthief
351w turbo build.... Turbo guys teach me things...
  • Kid wita 5oh
  • Oct 22, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 23, 2025
General karthief
SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
Engine HELP - 351W Based Build Under Stock Hood
  • thinkfaster
  • Oct 17, 2024
  • Fox 5.0 Mustang Tech
Replies
13
Views
2K
Fox 5.0 Mustang Tech Dec 31, 2025
Qtrhrse23
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?