help me I.D. this edelbrock head??????

dont know thats why i put it to the experts here... edelbrock said on the phone that they are victors but i did not think so by looking at them and seeing the victors at there site..do ya think it was worth the 500 i paid for the hole motor runs strong, oil presure 80 psi cold 45 at idle warm, hell of a top end pull, 19 mpg
 
pjc600 said:
dont know thats why i put it to the experts here... edelbrock said on the phone that they are victors but i did not think so by looking at them and seeing the victors at there site..do ya think it was worth the 500 i paid for the hole motor runs strong, oil presure 80 psi cold 45 at idle warm, hell of a top end pull, 19 mpg

If that was the whole motor,yea you did good.

:nice:
 
ok

thanks for the responce, and yes that price is for the entire engine

now that we know what heads they are i have a quick quistion?
is it normal for these to make noise like a ticking at idle thro 2000 rpm slight noise but for shure from the head, i checked all the exaust for leaks then went to the heads with a trusty flathead screwdriver, pass head is where the noise is from. i tourked all rockers and re try'd still the same is it just the spring pressure on the valves, the noise im hearing is it the valve closing?????????

the hole engine seams to make this noise all clyd's


and if there peformer heads why did i have to portmach the living hell out of my performer rpm intake?????