• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Help me ID this roller motor for my 68

  • Thread starter Thread starter my9302002
  • Start date Start date Feb 13, 2009

my9302002

Member
Oct 28, 2007
88
1
6
Feb 13, 2009
#1
  • Feb 13, 2009
  • #1
Have a chance to buy a HO motor. Person selling says it was out of a Lincoln but he doesn't know what year. I've seen a picture of it and it does say 5.0 HO on the FI intake. Would this be a Mark VII motor? That would make it the same as a Mustang HO, right? If he's wrong about what it's out of, does it matter since it says HO on it?

I've done searches for a roller motor in the archives and I know the good motors are the Mustang 87-93 and the explorer 96-01. I also know that the Mark VII were rollers. BUT I know there are flat tappet roller blocks and this I don't want.
Thanks,
Andrew
 

afast93stang

Founding Member
Jan 6, 2002
1,407
4
39
North Texas
Feb 13, 2009
#2
  • Feb 13, 2009
  • #2
Take a look at the casting #s that are up where the starter is. Thats the only way to tell for sure what block it is and what year it was made.

Intakes can be swapped on...
 

my9302002

Member
Oct 28, 2007
88
1
6
Feb 13, 2009
#3
  • Feb 13, 2009
  • #3
Are the casting marks visible without removing the starter? Can you give me a general idea on the casting numbers? Which number or letter signifies year and make of the car in went into?
Thanks....
 

my9302002

Member
Oct 28, 2007
88
1
6
Feb 13, 2009
#4
  • Feb 13, 2009
  • #4
I think this should work, right?


FORD PART NUMBERS TELL A STORY
Here's how to decipher Ford part numbers, such as D1ZZ-6675-C, for example:
The first two digits indicate year. The letter is the decade;
A = '40s
B = '50s
C = '60s
D = '70s
E = '80s
F = '90s
G = '00s

The third digit designates body line;
A = Ford full size
D = Falcon
E = Escort
F = Pinto, Maverick, Falcon
G = Early Comets, Montego, Cyclone
H = Medium/Heavy Duty Truck
K = Edsel
L = Lincoln Mark VII
M = Mercury
O = Fairlane
R = Capri
S = Thunderbird
T = Pick-up Truck or Bronco
U = Econoline Van
V = Lincoln
W = Cougar
Z = Mustang
{there are actually many more}

The fourth position signifies Engineering group;
A = Chassis
B = Body
E = Engine

If it's a Service Replacement part;
Z = Ford Division
Y = Lincoln-Mercury
X = Original Muscle Parts program
M = Ford Motorsport, SVO, FFRP

The center number, four or more numbers or letters, is the part number.
The A at the end of the number indicates that the part is the first version. If it was revised once, it would be B. If it was revised again, it would be C, and so on. When they run out of letters, it becomes AA, AB, and so on.

So if we decode this number, D1ZZ-6675-C, we come up with the
following:

D1 = 1971 model year.
Z = Mustang.
Z = Ford Division Service Replacement part.
6675 = the group number for oil pans.
C = The third version of this part.



--------------------------------------------------------------------------------
 

afast93stang

Founding Member
Jan 6, 2002
1,407
4
39
North Texas
Feb 13, 2009
#5
  • Feb 13, 2009
  • #5
Yup, or you can always plug the numbers into google, it should give you the decoded results.
 
D

D.Hearne

New Member
Sep 29, 2000
11,730
6
0
south louisiana
Feb 13, 2009
#6
  • Feb 13, 2009
  • #6
The casting numbers are only going to tell you if the block is a roller. And as previously stated, the upper intakes can be swapped. Only disassembling the motor (pulling the intake and oilpan) will tell you if it's a true HO.
 
You must log in or register to reply here.

Similar threads

6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
853
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
8
Long Time Coming
  • 85gtCOBRA
  • Oct 18, 2025
  • The Welcome Wagon
Replies
1
Views
117
The Welcome Wagon Oct 18, 2025
2Blue2
S
Requesting Guidance for 306 motor swap - Fuel? - SD? MAF?
  • So_Flo
  • Jul 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 4, 2026
Mcmahst
S
Help with window and possible engine
  • StefRena22
  • Jun 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
887
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2025
Willybill32
Engine 302 production block selection
  • FastDriver
  • May 19, 2024
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
48
Views
7K
Fox 5.0 Mustang Tech Jul 1, 2025
FastDriver
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?