help me identify some brake parts

I posted earlier that i had a leak on a port on my master cylinder. I was then told that i have a fox mc on the not an sn95 as i was told when i bought it. It however has some sort of 3-2 conversion. The car has ranger drums and sn95 front calipers/rotors/spindles.

I took a pic of my mc and my pv to verify what they are, so i can do a proper 3-2 conversion and get my brakes fixed. Thanks for any help

View attachment 249549
View attachment 249550
 
  • Sponsors (?)


First off, you have a line lock installed on the front brakes that is combining the two lines into one. It is one way to do a 3 to 2 port conversion. The MC does look like a Fox one to me. One way to tell is if there is a port on the bottom of the MC. Sometimes when they install a LL on Fox cars a plug is used on the 3rd port. Then both front lines are plumbed into the rear outlet from the PV.