• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

help me REDO my a/c system. i want it ICE ICE cold

  • Thread starter Thread starter dderek
  • Start date Start date May 28, 2004

dderek

New Member
Feb 29, 2004
180
0
0
May 28, 2004
#1
  • May 28, 2004
  • #1
well. i drove around in my '86 gt today for about 45 min to an hour, trying to get stuff done. and its over 90 outside.. (florida sucks)
one the driver window works. and the a/c has never been cold. and i never bothered to fix it.

but today was it. i was so hot i decided its time to redo the entire a/c system in my '90 lx before i put it all back together.. i want it as cold as it can possibly get.
i know most of you take out your entire a/c system, but hopefully.. some of you havent and can help me

i dont know jack **** about a/c or how it works. only that theres a compressor, and a condenser. but anyways, so i could use some help

anyways, i picked these out of jegs. will they mount up on my '90 lx ok?
and is there anything else im missing? or better parts?


Jegs A/C Compressor 6-Rib Serpentine Pulley, Chrome Finish.
Compressor: $299.99

Be Cool Air Conditioner Condenser, All Aluminum .. & .. Condenser Brackets for 134-76001, Natural Finish
Condenser: $199.99
Brackets: $99.99

(ps. i know chrome is $100 more, but. this car will look awesome when its done)

thanks in advance
Derek
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
May 28, 2004
#2
  • May 28, 2004
  • #2
My 25 cent explaination of how air conditioning works...

First, the compressor compresses the refrigerant into a hot gas. The condenser is up front of the radiator, and it is supposed to condense the hot gas from the compressor into a hot liquid. The hot liquid goes to the expansion valve located in the tubing next to the firewall. The expansion valve lets the hot liquid expand and become a cold gas, the cold gas goes to the evaporator inside the car where the fan blows on the evaporator exterior. The heat transfer from the air inside the car to the cold gas inside the evaporator causes the A/C to blow cold air. The now cool gas goes to the compressor where it gets compressed again into a hot gas and the process starts all over again. Keep in mind that this is a closed system, and the gas inside the A/C doesn't get out unless there is a leak.

See www.aircondition.com for help.

Plan on replacing the dryer (aluminum canister on the passenger side firewall) cost is about $100.

Recharging the system with R12 (if you can find someone to do it) will run $120-$180 for R12 & labor. They don't make R12 anymore, but some auto A/C shops still have some hidden away.

I wouldn't buy A/C parts from Jegs, they probably are not Mustang specific. This means they may or may not fit. Check out Autozone or Advance Auto parts or even the junkyard.

For Do It Yourself installation help, see http://jrichker.stangnet.com/Mustang_tech/R134a_conversion/R134a_conversion.htm You will get some idea on what's involved and weither you want to make the investment in time, tools and labor.

The alternative is for you to assemble everything and then take it to a professional auto A/C shop and have them vacuum it down charge & leak check it. That's probably about $100 worth of parts & labor.
 

stangbear427

Active Member
Nov 11, 2002
2,401
1
49
New England
May 28, 2004
#3
  • May 28, 2004
  • #3
Best route, HoseWizard. None better, or as complete. (none more expensive, but you won't be disappointed)
 

dderek

New Member
Feb 29, 2004
180
0
0
May 28, 2004
#4
  • May 28, 2004
  • #4
stangbear427 said:
Best route, HoseWizard. None better, or as complete. (none more expensive, but you won't be disappointed)
Click to expand...

hosewizard huh?
they got a website or somethin?
 

stangbear427

Active Member
Nov 11, 2002
2,401
1
49
New England
May 28, 2004
#5
  • May 28, 2004
  • #5
Yes, but currently, I can't find it. Looking through old MM&FF's right now...
 

stangbear427

Active Member
Nov 11, 2002
2,401
1
49
New England
May 28, 2004
#6
  • May 28, 2004
  • #6
Actually, maybe they don't. They do have a toll free though: 1-877-252-3364.
 

joelliott

New Member
May 17, 2004
210
0
0
Gainesville, FL
May 28, 2004
#7
  • May 28, 2004
  • #7
Hey man where you from? Im between Gainesville and a small southern town called LaBelle near Ft Myers. I am having the same issues right now. It has been wicked hot here lately. 102* yesterday on my front porch, and today was just alittle cooler at 98*. My black stang gets warm all day and is toastin when I get in it to drive. I want Ice AC too! Good Luck.
Joe E.
 
K

kevin2m4

New Member
Mar 16, 2004
50
0
0
Barrie Ontario Canada
May 29, 2004
#8
  • May 29, 2004
  • #8
ill trade ya places, i could see the respiration in my breath today it was so cold out up here in canada.
 

stangbear427

Active Member
Nov 11, 2002
2,401
1
49
New England
May 29, 2004
#9
  • May 29, 2004
  • #9
"I'd rather shiver than fry"
-Long John silver
 

dderek

New Member
Feb 29, 2004
180
0
0
May 29, 2004
#10
  • May 29, 2004
  • #10
joelliott said:
Hey man where you from? Im between Gainesville and a small southern town called LaBelle near Ft Myers. I am having the same issues right now. It has been wicked hot here lately. 102* yesterday on my front porch, and today was just alittle cooler at 98*. My black stang gets warm all day and is toastin when I get in it to drive. I want Ice AC too! Good Luck.
Joe E.
Click to expand...

im down in jupiter. its been killer lately.
cant take it anymore
 

joelliott

New Member
May 17, 2004
210
0
0
Gainesville, FL
May 29, 2004
#11
  • May 29, 2004
  • #11
I know your feeling. Its ^pm now and its still 98* out. Nuts! Ill shiver anyday compared to this. I cant even wash my car without taking a shower afterwords. Nuts. Stay cool!
INSIDE!
Joe E.
 
T

Tstang90

Founding Member
Jun 21, 2000
2,380
0
46
Long Island,NY
May 29, 2004
#12
  • May 29, 2004
  • #12
I have a brand new air dryer in the bag if any one is interested. Pm or email me.
 

91lxvert

Member
Dec 13, 2003
110
0
16
May 30, 2004
#13
  • May 30, 2004
  • #13
is your whole stock system in? if so go out and hit the shrader valve with a screwdriver or sumthing if it hisses,(as long as you havent opened it up) its still hold pressure, empty it out(any means necessary although not legal) go to wal-mart or autozone and buy a r134 retrofit kit 35 bucks follow directions, enjoy, if it leaks out oh well only 35 bucks!
 
You must log in or register to reply here.

Similar threads

B
Price?
  • Blueinfan
  • May 27, 2022
  • What is it Worth?!?!?
  • 2
Replies
28
Views
5K
What is it Worth?!?!? May 30, 2022
7991LXnSHO
B
Engine A/C reinstall questions.
  • Brokersteve
  • Mar 30, 2018
  • Fox 5.0 Mustang Tech
Replies
16
Views
4K
Fox 5.0 Mustang Tech Nov 28, 2018
Jarhead67
J
R
Fox Closed PCV System, Dual Valve Catch Can
  • RTW0223
  • Dec 6, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
14K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 30, 2021
jay98
H
Fox A/c Kit Hardware
  • hamirick
  • Jul 13, 2017
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
583
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 13, 2017
revhead347
Car put me down......again. What now?
  • Wayne Waldrep
  • Sep 10, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
38
Views
7K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 18, 2023
Mindseye007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?