• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Help Me Spend 2000 bucks on my car

  • Thread starter Thread starter SliverStang
  • Start date Start date Jan 4, 2004
  • 1
  • 2
Next
1 of 2 Next Last

SliverStang

Member
May 25, 2003
270
0
16
Pineville, LA
Jan 4, 2004
#1
  • Jan 4, 2004
  • #1
Ok Ive thought about getting some heads and cams but on another thread I started I was informed that it would only give me about 20 or so hp.

My car is a 99 Mustang GT with an automatic transmission and it has 75,000 miles on it. All the mods that I have are listed in my sig. Im thinking about getting some chrome wheels and then spending the rest on making the car faster. I would really like to be able to out run some SS camaros with it I hate losing all the time. I know most people are going to say get some Nitrous really id love to but how long will a 4.6 with 75,000 miles on it hold up under me sprayin nitrous in it all the time. Please give me some ideas more less tell me what you would do if you were in my sitution. Thanks guys! Oh yeah don't say save up for a supercharger cause it took me a long time to get 2000 bucks and it would alot more time to get a supercharger.
 

Wills Black 98

New Member
Dec 16, 2002
2,455
0
0
Western North Carolina
Jan 4, 2004
#2
  • Jan 4, 2004
  • #2
if your looking for power id get a direct port nitrous kit with all the goodies
 

SliverStang

Member
May 25, 2003
270
0
16
Pineville, LA
Jan 4, 2004
#3
  • Jan 4, 2004
  • #3
You don't think that it could blow somting up pretty quick on my engine being it has high miles?
 

Screwed2V

New Member
Aug 6, 2003
1,255
1
0
Misery
Jan 4, 2004
#4
  • Jan 4, 2004
  • #4
SliverStang said:
You don't think that it could blow somting up pretty quick on my engine being it has high miles?
Click to expand...
Do a compression check first. If all is well there you'll be fine with n2o providing the tune is correct.

By the way, if heads and cams only resulted in 20 rwhp nobody would do it. I'd do some more research on that subject with some builders/tuners instead of on the forums.
 

krly79

Member
May 6, 2003
464
0
16
VA Beach & So Illinois
Jan 4, 2004
#5
  • Jan 4, 2004
  • #5
I've heard a few 99+ stangs around here put down 300 rwhp after a head job stock. I heard this at a stang shop when I was getting my gears installed. I don't know how true this is though. You should be able to pick up alot with a good head job and cams. I think I would do that if I could. How much is a stroker kit?
 

SliverStang

Member
May 25, 2003
270
0
16
Pineville, LA
Jan 4, 2004
#6
  • Jan 4, 2004
  • #6
I looked at T&J's web site and they had the stage 2 porting for like 1600 and the cams are like 600 or so.. I can do that if it is going to give me alot of power. Ill do the install myself. But id want to find out how much power id get from it.
 

Screwed2V

New Member
Aug 6, 2003
1,255
1
0
Misery
Jan 4, 2004
#7
  • Jan 4, 2004
  • #7
SliverStang said:
I looked at T&J's web site and they had the stage 2 porting for like 1600 and the cams are like 600 or so.. I can do that if it is going to give me alot of power. Ill do the install myself. But id want to find out how much power id get from it.
Click to expand...
Click on the cobra killer tech link and ask him.
 

SliverStang

Member
May 25, 2003
270
0
16
Pineville, LA
Jan 4, 2004
#8
  • Jan 4, 2004
  • #8
ok i just signed up and asked. If the head are not going to make as much as power as i want What do you guys think I should do?
 

Screwed2V

New Member
Aug 6, 2003
1,255
1
0
Misery
Jan 4, 2004
#9
  • Jan 4, 2004
  • #9
SliverStang said:
ok i just signed up and asked. If the head are not going to make as much as power as i want What do you guys think I should do?
Click to expand...
N2O but the heads/cams will do the job imo.
 

SliverStang

Member
May 25, 2003
270
0
16
Pineville, LA
Jan 4, 2004
#10
  • Jan 4, 2004
  • #10
well id lot rather stay N/A then having to worry about filling a empty bottle up all the time! 40 bucks a pop will get old fast!
 

Screwed2V

New Member
Aug 6, 2003
1,255
1
0
Misery
Jan 4, 2004
#11
  • Jan 4, 2004
  • #11
SliverStang said:
well id lot rather stay N/A then having to worry about filling a empty bottle up all the time! 40 bucks a pop will get old fast!
Click to expand...
You got that right. That's why I put a blower on mine.
 

GoBabyVroommm

Active Member
Mar 22, 2003
1,156
0
36
Chicago, For Realss???!!!
Jan 4, 2004
#12
  • Jan 4, 2004
  • #12
Well if i were you i'd get some Y2k rims and drop it.

You can go with nitrous but if your like any of my friends you'll want more and more and sooner or later you'll blow your motor. If its not your motor you'll blow your trans. Get the rims and the drop, save your money for a beefed up 2v or a 4v swap.

Nitrous, blower, turbo break a lot of things, if you don't have the money to fix it when a piston blows, head gasket, etc... don't waste your time.

I remember when i use to have to save to get a exhaust just for the stang, that really sucked. So don't go out getting some extreme for you car and blowing it a month later. Enjoy what you have, when you get a better job you can work on smoking cars faster than LS1s.
 
D

DerekStangGT

My package is in the mail!
Feb 18, 2003
1,068
0
36
Jan 4, 2004
#13
  • Jan 4, 2004
  • #13
oh boy, im always so giddy when i get to spend other people's money!! if you want some power, maybe a C&L plenum, timing adjuster, pullies, and a good tune. all that will still leave you enough for some chrome Y2ks
 

hognutz

New Member
Nov 12, 2002
1,940
0
0
albany, oregon
Jan 5, 2004
#14
  • Jan 5, 2004
  • #14
I would do heads and cams. you should get say 40-50hp. That power will always be there. I am not a nitrous fan because I like my power on tap at all times. if you are just in it to race at the track then nitrous is fine.

I think with your gears and your setup heads and cams would be a good start.
 
S

san~man

O-G
Founding Member
Nov 29, 1999
8,546
3
78
A little grass shack on a big lava rock
Jan 5, 2004
#15
  • Jan 5, 2004
  • #15
If you do heads and cams, you'll most likely have to tune the car.

How about a nice torque convertor and a good shift kit (you'll need a tune here too). Well under 2K, but you won't be outrunning no LS1's after their 3rd gear.
 

KaPPaBaLL

New Member
Nov 28, 2003
1,326
0
0
BAYAREA
Jan 5, 2004
#16
  • Jan 5, 2004
  • #16
i'll PM you with my address just send a check to me alright?
 

jadesville

the polarbear conservation corps protects a polarb
20+ Year Stangneter
Oct 8, 2003
2,189
0
47
Gresham, OR
Jan 5, 2004
#17
  • Jan 5, 2004
  • #17
go with what san man said, tq converter, shift kit, and if you dont have em already, get springs..
 

StngStr

Member
Jun 24, 2003
616
0
17
Central Florida
Jan 5, 2004
#18
  • Jan 5, 2004
  • #18
SliverStang said:
Oh yeah don't say save up for a supercharger cause it took me a long time to get 2000 bucks and it would alot more time to get a supercharger.
Click to expand...

Save up for a blower.
 

GoBabyVroommm

Active Member
Mar 22, 2003
1,156
0
36
Chicago, For Realss???!!!
Jan 5, 2004
#19
  • Jan 5, 2004
  • #19
KaPPaBaLL said:
i'll PM you with my address just send a check to me alright?
Click to expand...

 
K

kennym01

New Member
Jun 23, 2003
343
0
0
Jan 6, 2004
#20
  • Jan 6, 2004
  • #20
If you don't want to get blower at 75,000 miles, then put the $2000.00 toward a new mustang. There are some really good deals going on right now...
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

K
Electrical 2000 GT Intermittent Engine Shutdown In Motion - DTC U1262
  • kenster1092
  • Apr 13, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
205
SN95 4.6L Mustang Tech Apr 24, 2026
squeak93
P
2000 GT Random Power Loss
  • Pinellas50
  • Mar 9, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
303
SN95 4.6L Mustang Tech Mar 23, 2026
Pinellas50
P
L
2000 Mustang PATS - Broken Key and Wire - HELP!
  • Laree Taylor
  • May 7, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
10
Views
207
1996 - 2004 SN95 Mustang -General/Talk- May 12, 2026
manicmechanic007
F
Car dies on bumps and when braking
  • Feckl
  • Jul 14, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
176
SN95 4.6L Mustang Tech Jul 19, 2025
squeak93
Who the hell puts the wrong spark plugs in a 3.8L?
  • snowstang
  • Mar 25, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
12
Views
443
1996 - 2004 SN95 Mustang -General/Talk- Apr 3, 2026
LILCBRA
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?