• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Help me with some gears!!!

  • Thread starter Thread starter Maza4ever14
  • Start date Start date May 31, 2005
  • 1
  • 2
Next
1 of 2 Next Last

Maza4ever14

New Member
Apr 27, 2005
187
0
0
Bay Area, CA
May 31, 2005
#1
  • May 31, 2005
  • #1
ok i have a 2004 GT 4.6L 2v Auto. im fairly new to the car scene and ive tried finding som egears but no luck. im set on finding a pair of gears, 3.73. im was wondering if i should stick with the Ford Racing gears or other brands. recommend me some brands and if you can hook it up with a link with some prices and stuff. thanks in advance.
 

sgarlic

Founding Member
Apr 21, 2001
3,085
1
56
Jun 1, 2005
#2
  • Jun 1, 2005
  • #2
Depends on who is going to install them. Reputable shops won't install crappy gears for you.

FRPP is always a good choice. I believe several people run Motive with no problems, but I was told recently by a local differential shop here in Tucson, that they are manufactured over-seas (as opposed to formerly being manufactuered here in the US,) and don't have the same quality as FRPP do anymore.

And go with 4.10's, you'll be glad you did.

FRPP - buyfordracing.com

If you want the Motive's, brenspeed.com
 

Maza4ever14

New Member
Apr 27, 2005
187
0
0
Bay Area, CA
Jun 1, 2005
#3
  • Jun 1, 2005
  • #3
i plan on getting it installed at Ford dealership garage by my uncle, he is cool so no labor charger or anything as long as i go and help him out and take him to lunch or something.

thanks for your help also. any other advice?
 
J

Joel's98GT

New Member
Jan 3, 2004
368
0
0
central OH
Jun 1, 2005
#4
  • Jun 1, 2005
  • #4
Maza4ever14 said:
any other advice?
Click to expand...

get a pair and buy 4.10's
 

HoustonGT

Gilded Gelding
Apr 6, 2003
1,418
0
0
Houston
Jun 1, 2005
#5
  • Jun 1, 2005
  • #5
You have an auto so go with the 4.10's
 

Give Me TP

Member
Jun 17, 2004
936
0
16
Republic of Texas
Jun 1, 2005
#6
  • Jun 1, 2005
  • #6
HoustonGT said:
You have an auto so go with the 4.10's
Click to expand...

What he just said
 

COramprat

...I can take it. I think.
20+ Year Stangneter
Mar 2, 2003
8,474
1,463
223
Sea of Tranquility
Jun 1, 2005
#7
  • Jun 1, 2005
  • #7
With any gear you will need to have the speedo adjusted. Best way to get this done on your car is to get a chip or have the computer flashed for the swap.

Prices on gears vary but I have seen the 3.73's are about 50 bucks cheaper than 4.10's. Supply and demand applies here since most people are going with 4.10's it makes them more popular.

Link to 3.73's

Link to 4.10's

I agree with going with the FRPP product since they are still made in the good ol' USA. I'm not a big fan of buying ANYTHING from overseas, especially critical components on my car.
 
R

Rocketman

New Member
Apr 20, 2004
730
0
0
SoCal
Jun 1, 2005
#8
  • Jun 1, 2005
  • #8
Get FRPP 4.10 gears for your auto and get a chip to correct the speedo.
 

Jinx

I like cats, cats like me. Cats and I fully agree.
20+ Year Stangneter
Oct 2, 2003
12,166
4,237
223
Cat Country
Jun 1, 2005
#9
  • Jun 1, 2005
  • #9
Another vote for FRPP (4:10s that is) rumor has it that Richmond gears are notorious for whinning.

Wish I had a family mechanic.

Good luck
 

Dark Knight GT

I can't get it up......ok that didn't sound right.
May 26, 2003
3,653
2
56
Ozark, Missouri
Jun 1, 2005
#10
  • Jun 1, 2005
  • #10
I'll go with the other guys and say 4.10's and if you got balls like me and you're planning on staying n/a, then go for 4.30's. I have them in my car and I love them.

I also second the motion of Ford Racing gears. Best places to buy gears are either from Randy Stinchcomb(he has lots of specials on 4.10's) at Liberty Ford or from the following places.

www.stangstore.com
www.gefracing.com
www.mustangtuning.com

You can also contact Randy Stinchcomb at www.modulardepot.com under the forums board. Just go there, look at the top, click on the forums tab, and while in the forums section, look for the part called "Ford Parts". You can contact Randy there. He's a great guy to work with and will help you out with whatever you need. Speaking about what you need, you'll need two new qts of rear-differential fluid and a 4.oz bottle of friction modifier. I think the guy doing the gear install can examine the rest of the parts of your rear diff. and tell you if anything else needs replaced.
 

Drannon

New Member
May 19, 2005
8
0
0
Utah
Jun 1, 2005
#11
  • Jun 1, 2005
  • #11
as far as chips go what kind would you recomend, i just ordered 4.10 gears for my 03 GT..what about the diablo chip
 

Dark Knight GT

I can't get it up......ok that didn't sound right.
May 26, 2003
3,653
2
56
Ozark, Missouri
Jun 1, 2005
#12
  • Jun 1, 2005
  • #12
SCT Tune
 

9646gt

Member
Apr 7, 2005
595
3
18
Holloman AFB,NM
Jun 1, 2005
#13
  • Jun 1, 2005
  • #13
I love the FRPP 4.10's in my car ..it will REALLY wake the car up and the RPMs are still not bad on the highways....not one bit of whine but that all depends on who installs them..
 

Give Me TP

Member
Jun 17, 2004
936
0
16
Republic of Texas
Jun 1, 2005
#14
  • Jun 1, 2005
  • #14
Drannon said:
as far as chips go what kind would you recomend, i just ordered 4.10 gears for my 03 GT..what about the diablo chip
Click to expand...

SCT tune (as previously mentioned) or Diablo Predator. A chip isn't needed on an '03 model.
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Jun 1, 2005
#15
  • Jun 1, 2005
  • #15
FRPP 4.10s + Diablo Predator = Ricers in your town learn some RESPECT!
 

Maza4ever14

New Member
Apr 27, 2005
187
0
0
Bay Area, CA
Jun 1, 2005
#16
  • Jun 1, 2005
  • #16
oh my debit card is tingling right now cuz i got paid yesterday.

so im set on FRPP 4.10s. now for the tune, should i get a chip or just go for the tune? ive been eyeing the diablosport predator tune for a while but they dealer told me to install it after i finished modding it.

and recommend any good tuners in Nor Cal?
 
D

DSG'04GT

New Member
May 19, 2005
3
0
0
Harker Heights, TX
Jun 1, 2005
#17
  • Jun 1, 2005
  • #17
I just purchased some gears today. 4.10's after everyone I've talked to recommended those. Might get them installed tomorrow. If not tomorrow then within the next week or so. My Tri-ax should be here by the end of the week too, so the fun factor on my GT should be kicked up a few notches soon
 

Dark Knight GT

I can't get it up......ok that didn't sound right.
May 26, 2003
3,653
2
56
Ozark, Missouri
Jun 1, 2005
#18
  • Jun 1, 2005
  • #18
Maza4ever14 said:
oh my debit card is tingling right now cuz i got paid yesterday.

so im set on FRPP 4.10s. now for the tune, should i get a chip or just go for the tune? ive been eyeing the diablosport predator tune for a while but they dealer told me to install it after i finished modding it.

and recommend any good tuners in Nor Cal?
Click to expand...
If all you have is bolt-on modifications, I say go with a chip from Superchips Tuning. They'll be able to build you a custom program for that automatic as Jerry Wroblewski, the same guy who designed the 4r70w automatic transmission for Ford now works for SCT and is involved in custom tuning, especially for automatics. Just a quick note, if you do not have a transmission cooler yet, you better get one. Heat is the number one killer of automatic transmissions and with 4.10 gears, that transmission fluid is going to be running at hotter temperatures than normal.
 

Maza4ever14

New Member
Apr 27, 2005
187
0
0
Bay Area, CA
Jun 1, 2005
#19
  • Jun 1, 2005
  • #19
wow thanks for that, i woulda never thought of that.
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
Jun 1, 2005
#20
  • Jun 1, 2005
  • #20
coramprat said:
With any gear you will need to have the speedo adjusted. Best way to get this done on your car is to get a chip or have the computer flashed for the swap.

Prices on gears vary but I have seen the 3.73's are about 50 bucks cheaper than 4.10's. Supply and demand applies here since most people are going with 4.10's it makes them more popular.

Link to 3.73's

Link to 4.10's

I agree with going with the FRPP product since they are still made in the good ol' USA. I'm not a big fan of buying ANYTHING from overseas, especially critical components on my car.
Click to expand...


his uncle works at a ford dealer. so his uncle can do it.

tell you uncle too grab the WDS and go into programmable parameters. you will find axle ratio and tire hight adjustments.

there is selections up too 3.73 and a key pad you can type in 4.10 or as high as you want too go.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Oct 7, 2026
2v_johnny
2
SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
Engine HELP - 351W Based Build Under Stock Hood
  • thinkfaster
  • Oct 17, 2024
  • Fox 5.0 Mustang Tech
Replies
13
Views
2K
Fox 5.0 Mustang Tech Dec 31, 2025
Qtrhrse23
S
what would you do? sell the project and buy completed or finish project?
  • STANG32
  • Feb 8, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
717
1965 - 1973 Classic Mustangs -General/Talk- Feb 16, 2025
rusty428cj
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
4K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?