Help me with some gears!!!

Maza4ever14

New Member
Apr 27, 2005
187
0
0
Bay Area, CA
ok i have a 2004 GT 4.6L 2v Auto. im fairly new to the car scene and ive tried finding som egears but no luck. im set on finding a pair of gears, 3.73. im was wondering if i should stick with the Ford Racing gears or other brands. recommend me some brands and if you can hook it up with a link with some prices and stuff. thanks in advance.
 
Depends on who is going to install them. Reputable shops won't install crappy gears for you.

FRPP is always a good choice. I believe several people run Motive with no problems, but I was told recently by a local differential shop here in Tucson, that they are manufactured over-seas (as opposed to formerly being manufactuered here in the US,) and don't have the same quality as FRPP do anymore.

And go with 4.10's, you'll be glad you did.

FRPP - buyfordracing.com

If you want the Motive's, brenspeed.com
 
i plan on getting it installed at Ford dealership garage by my uncle, he is cool so no labor charger or anything as long as i go and help him out and take him to lunch or something.

thanks for your help also. any other advice?
 
With any gear you will need to have the speedo adjusted. Best way to get this done on your car is to get a chip or have the computer flashed for the swap.

Prices on gears vary but I have seen the 3.73's are about 50 bucks cheaper than 4.10's. Supply and demand applies here since most people are going with 4.10's it makes them more popular.

Link to 3.73's

Link to 4.10's

I agree with going with the FRPP product since they are still made in the good ol' USA. I'm not a big fan of buying ANYTHING from overseas, especially critical components on my car.
 
Another vote for FRPP (4:10s that is) rumor has it that Richmond gears are notorious for whinning.

Wish I had a family mechanic. :(

Good luck :nice:
 
I'll go with the other guys and say 4.10's and if you got balls like me and you're planning on staying n/a, then go for 4.30's. I have them in my car and I love them.

I also second the motion of Ford Racing gears. Best places to buy gears are either from Randy Stinchcomb(he has lots of specials on 4.10's) at Liberty Ford or from the following places.

www.stangstore.com
www.gefracing.com
www.mustangtuning.com

You can also contact Randy Stinchcomb at www.modulardepot.com under the forums board. Just go there, look at the top, click on the forums tab, and while in the forums section, look for the part called "Ford Parts". You can contact Randy there. He's a great guy to work with and will help you out with whatever you need. Speaking about what you need, you'll need two new qts of rear-differential fluid and a 4.oz bottle of friction modifier. I think the guy doing the gear install can examine the rest of the parts of your rear diff. and tell you if anything else needs replaced.
 
oh my debit card is tingling right now cuz i got paid yesterday.

so im set on FRPP 4.10s. now for the tune, should i get a chip or just go for the tune? ive been eyeing the diablosport predator tune for a while but they dealer told me to install it after i finished modding it.

and recommend any good tuners in Nor Cal?
 
I just purchased some gears today. 4.10's after everyone I've talked to recommended those. Might get them installed tomorrow. If not tomorrow then within the next week or so. My Tri-ax should be here by the end of the week too, so the fun factor on my GT should be kicked up a few notches soon :nice:
 
Maza4ever14 said:
oh my debit card is tingling right now cuz i got paid yesterday.

so im set on FRPP 4.10s. now for the tune, should i get a chip or just go for the tune? ive been eyeing the diablosport predator tune for a while but they dealer told me to install it after i finished modding it.

and recommend any good tuners in Nor Cal?
If all you have is bolt-on modifications, I say go with a chip from Superchips Tuning. They'll be able to build you a custom program for that automatic as Jerry Wroblewski, the same guy who designed the 4r70w automatic transmission for Ford now works for SCT and is involved in custom tuning, especially for automatics. Just a quick note, if you do not have a transmission cooler yet, you better get one. Heat is the number one killer of automatic transmissions and with 4.10 gears, that transmission fluid is going to be running at hotter temperatures than normal.
 
coramprat said:
With any gear you will need to have the speedo adjusted. Best way to get this done on your car is to get a chip or have the computer flashed for the swap.

Prices on gears vary but I have seen the 3.73's are about 50 bucks cheaper than 4.10's. Supply and demand applies here since most people are going with 4.10's it makes them more popular.

Link to 3.73's

Link to 4.10's

I agree with going with the FRPP product since they are still made in the good ol' USA. I'm not a big fan of buying ANYTHING from overseas, especially critical components on my car.


his uncle works at a ford dealer. so his uncle can do it.

tell you uncle too grab the WDS and go into programmable parameters. you will find axle ratio and tire hight adjustments.

there is selections up too 3.73 and a key pad you can type in 4.10 or as high as you want too go. :nice: