O2 Pigtail Was Cut Off, Bought A New One, Was Universal All Black Wires Dont Know Which Wires Connect To Which. Pigtail Was All Black But The O2 Sensor Wires Were 2 White 1 Grey And 1 Black. The pigtail That Came From The Car were White W A Black Stripe, Red W A Yellow stripe, Red W A Green Stripe And Grey W A Red Stipe.
2000 Mustang Gt 4.6
 

Attachments

  • F20D5B5F-D674-4B34-814D-C5EAA795EEAE.jpeg
    F20D5B5F-D674-4B34-814D-C5EAA795EEAE.jpeg
    136 KB · Views: 150
  • 95DAAD05-718C-4258-AEB4-D04115FE7C48.jpeg
    95DAAD05-718C-4258-AEB4-D04115FE7C48.jpeg
    243.6 KB · Views: 156
  • Sponsors (?)


It would help if you gave us WHICH O2 sensor you are looking for the wire colors of?

But if by chance this is Bank 1 sensor 2, then C196:

Pin#
1 391 (RD/YE) Voltage supplied in Start and Run (overload protected)
2 389 (WH/BK) Heated Oxygen Sensor (HO2S) #12 (9G444), heater
3 359 (GY/RD) signal, return
4 392 (RD/LG) Heated Oxygen Sensor (HO2S) #12 (9G444), input

Here's a replacement connector so that you can perform the repair right.

MOTORCRAFT WPT742