Hey folks, I've got some valvetrain issues I really need help with. No matter what I do, I can't get rid of some really odd noises with my rockers. I'm running the SpeedPro (CS1117R) version of the Wolverine 1087 with matching springs, Crane pedestal to stud conversion, and Crane Energizer 1.6 RR's. I've tried the stock PR's, TFS 6.3 PR's (they gave the best pattern), 1/4, 1/2, 3/4 turns preload, even tried setting the preload with a dial indicater, and nothings working. I have tall VC's and nothings hitting anywhere as far as I can tell.
I've also used both Cranes instructions, and the "start at #1 at TDC and turn it 90* and run through the firing order method" for setting them up too.
Here's a small vid of the noise: View attachment 375896
Any help would be appreciated!
I've also used both Cranes instructions, and the "start at #1 at TDC and turn it 90* and run through the firing order method" for setting them up too.
Here's a small vid of the noise: View attachment 375896
Any help would be appreciated!