• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Help with 8.8 rear

  • Thread starter Thread starter 1990MustangLX50
  • Start date Start date Feb 26, 2008
1

1990MustangLX50

Member
Jul 11, 2007
89
0
7
Feb 26, 2008
#1
  • Feb 26, 2008
  • #1
ive got an 8.8 rear sitting on jack stands. If I turn a wheel both sides turn. If I hold the pinion yoke neither wheel will turn, I thought that with the yoke held 1 wheel should got one way and the other wheel the other way. Am i crazy or is something wrong with my rear?

thanks
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
Feb 26, 2008
#2
  • Feb 26, 2008
  • #2
could be a spool or someone might have wlded the gears, but yea when i have had my car on the jackstands and turned one wheel the other went the other way
 
1

1990MustangLX50

Member
Jul 11, 2007
89
0
7
Feb 26, 2008
#3
  • Feb 26, 2008
  • #3
It had some rust inside but I didnt think it was an issue. Guess I need to recheck some things.
 
1

1cobra4u

New Member
Feb 22, 2008
3
0
0
missouri
Feb 26, 2008
#4
  • Feb 26, 2008
  • #4
If its positrack they will both turn the same way
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Feb 26, 2008
#5
  • Feb 26, 2008
  • #5
if it was an open diff it would!
 

trbkrb

Founding Member
Jun 4, 2001
1,976
4
39
Houston, TX
Feb 26, 2008
#6
  • Feb 26, 2008
  • #6
All the 8.8s with traction loc I've touched both wheels turn the same way when you turn one. On an open dif they turn the opposite ways.
 

NKau

Founding Member
Dec 15, 2001
1,346
0
37
Jefferson, WI
Feb 26, 2008
#7
  • Feb 26, 2008
  • #7
These guys are correct; with a PROPERLY FUNCTIONING posi rear end, both wheels should turn the same way. I have seen posi's that were so worn out, that the wheels would spin the opposite way (typical of an open diff). No need to hold onto the yoke either; let it spin freely to test it. If it's a posi, it sounds like you'll be rebuilding it either way.
 
You must log in or register to reply here.

Similar threads

J
Suspension Foxbody mustang Steering shaft issue
  • Jakub2537
  • Sep 5, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
338
Fox 5.0 Mustang Tech Sep 11, 2026
gkomo
2000 GT-Front Brakes Not Releasing
  • stormsedge
  • Aug 7, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
250
1996 - 2004 SN95 Mustang -General/Talk- Aug 7, 2026
Bronco2fan
B
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
886
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
37
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 18, 2026
AeroCoupe
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
17
Views
1K
SN95 V6 Mustang Tech Aug 29, 2026
joeybuddy96
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?