Help with Tweecer and MAF

[TrueBlue95GT]

If I get a 80mm Pro-M calibrated for 36lb/hr injectors and I only have 19lb/hr injectors, can I use my tweecer to make it work? I found one really cheap and I'd rather not pay Pro-M to recalibrate it.

 

[mackey]

ttt. I am pretty sure you can. Post on the tweecer forums. How much did you pay for your tweecer and where did you get it? If you don't mind me asking

 

[BlackVert]

if you have an accurate flow sheet for it, it should work.

 

[95BlackTan50]

All you need to do is enter the flow numbers into the MAF function. There is a utility to convert the 9 point numbers into the 30 points that you need for the function. If you didn't get a flow sheet, you can get it from the ProM web site.

 

[TrueBlue95GT]

Can the flow sheet from the Pro-M website work or does it have to be a custom flow sheet?

 

[94GTLaserRC]

Screw all that...
All you gotta do is change your injector slopes to tell it you have 19lb injectors.

That's all I did when I changed from 30's to 36's with the MAM still set for 30.

GL.
RC

 

[Zero Signal]

Yeah you can change your injector slopes or the MAF transfer. I would just enter the transfer curve they give you then change your injector slopes untill you're running about the right AFR.

 

[BlackVert]

How much did you pay for your tweecer and where did you get it? If you don't mind me asking

there's a guy selling one for $500 here

http://autos.groups.yahoo.com/group/tweecer/message/12323

or ppl sell them here from time to time

http://tweecer.oplnk.net/viewforum.php?f=6

- Chris