• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Help with what is stock and what's not... pics!

  • Thread starter Thread starter billison
  • Start date Start date Nov 14, 2012
  • 1
  • 2
Next
1 of 2 Next Last

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Nov 14, 2012
#1
  • Nov 14, 2012
  • #1
ok, my 92 has had work done to it but i'm not sure what all for sure, i don't have access to the owner who did the work and the last guy was a chevy guy..

the obvious things are the msd wire and cap set, best i can tell, the rest of the igniton is stock.




There is a cold air intake, not sure if anythng else with that was changed, i know the "maf" can be changed, i did'nt get a very good pic of the unit.




I was told the injectors are not original...





was also told the headers were aftermarket




and some over all shots







gotta clean up these wires...




Just trying to know for sure what it's got and what it don't.
 

Attachments

  • 217.webp
    26 KB · Views: 150
  • maf.webp
    20.1 KB · Views: 132
  • 222.webp
    22.5 KB · Views: 152
  • 223-1.webp
    23.6 KB · Views: 131
  • 221.webp
    19.9 KB · Views: 124
  • engine.webp
    51 KB · Views: 143
  • 214.webp
    28.4 KB · Views: 132
  • 215.webp
    22.2 KB · Views: 135
  • 216.webp
    26.1 KB · Views: 152

tannerc91gt

This last 25% is foreign territory at this point
Founding Member
Nov 29, 1999
4,392
2,967
234
Indiana
Nov 14, 2012
#2
  • Nov 14, 2012
  • #2
looks like an aftermarket housing, possible a c&l as its using the factory maf harness and plug. cold air, who knows, it does literally nothing anyways. the ignition is stock minus the cap and rotor, again nearly nothing. and the headers are aftermarket
 

boostfrk

10 Year Member
Aug 30, 2011
712
69
59
Colorado
Nov 14, 2012
#3
  • Nov 14, 2012
  • #3
The injector tops are also grey instead of orange. Mine are orange and are stock; I'm not sure what flow rate the grey tops are.
 

tannerc91gt

This last 25% is foreign territory at this point
Founding Member
Nov 29, 1999
4,392
2,967
234
Indiana
Nov 14, 2012
#4
  • Nov 14, 2012
  • #4
oh yeah and the injectors, if i remember right, and if theyre OEM ford like i think they are, are 14# injectors. I think crown vics and whatnot used them. those probably need to go.
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Nov 14, 2012
#5
  • Nov 14, 2012
  • #5
really? why in the world would someone put in 14# injectors, would'nt there be a bunch of issues from them? I'll try to see what the maf says on it in a few.
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Nov 14, 2012
#6
  • Nov 14, 2012
  • #6
how hard is it to pull one? i can get one out and get better pics...
 

tannerc91gt

This last 25% is foreign territory at this point
Founding Member
Nov 29, 1999
4,392
2,967
234
Indiana
Nov 14, 2012
#7
  • Nov 14, 2012
  • #7
unbolt the fuel rail, disconnect the harness at the injector and pull one out.
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Nov 14, 2012
#8
  • Nov 14, 2012
  • #8
ok, checked the maf, says


Maf says

Pro flow

Model 75mm6n

Calibration 24c
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Nov 14, 2012
#9
  • Nov 14, 2012
  • #9
i'm being told they might be 24# injectors
 

TOOLOW91

If you're the village idiot what's that make me?
20+ Year Stangneter
Nov 29, 1999
8,485
8,706
234
S.I.NY
Nov 14, 2012
#10
  • Nov 14, 2012
  • #10
I think you guys are a little color blind , those are really dull 24s hence the pro m meter for 24s , if it had 14s with a 24 meter it would run like chit!
 

FordRacing302

5 Year Member
Oct 1, 2005
384
42
59
Cleveland, TN
Nov 14, 2012
#11
  • Nov 14, 2012
  • #11
Most definately 24lb injectors, I see no grey...
 

tannerc91gt

This last 25% is foreign territory at this point
Founding Member
Nov 29, 1999
4,392
2,967
234
Indiana
Nov 14, 2012
#12
  • Nov 14, 2012
  • #12
I see gray, and have seen people do far dumber things. But it very well could be dirt or another brand. 24s would make the most sense. But how often do things make sense.
 

Chuckman

GTFO you fat, heavy bastard
15 Year Member
Oct 21, 2005
1,604
1,002
173
st. louis, mo
Nov 15, 2012
#13
  • Nov 15, 2012
  • #13
tannerc91gt said:
I see gray, and have seen people do far dumber things. But it very well could be dirt or another brand. 24s would make the most sense. But how often do things make sense.
Click to expand...

his camera/cell is shading things a bit, but theyre blue. the big question though is......why? stock intake, hell the t/b looks stock, but the rest of the bay looks like a mess, so who knows.
 

TOOLOW91

If you're the village idiot what's that make me?
20+ Year Stangneter
Nov 29, 1999
8,485
8,706
234
S.I.NY
Nov 15, 2012
#14
  • Nov 15, 2012
  • #14
I don't really think 24s are hurting anything , hell when my crank broke I put my stock motor in no smog no egr with elim plug and 24s with a meter and my car runs better then it ever did stock
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Nov 15, 2012
#15
  • Nov 15, 2012
  • #15
I'm really hoping to do the engine bay some justice this winter, I'm not even sure where to start on all these wires..
 

ratio411

Founding Member
Apr 21, 2002
3,870
73
109
Pensacola FL
Nov 16, 2012
#16
  • Nov 16, 2012
  • #16
The injectors are so dirty I can't tell if they are gray (14#) or blue (24#).
Just wipe one off so you can tell once and for all.
 

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
Nov 16, 2012
#17
  • Nov 16, 2012
  • #17
Yea you have headers, injectors, and MAF. You're really not benefiting at all from those injectors but by no means are they hurting. They are a good foundation for future mods. The relay on the driver side next to the starter solenoid is not factory, neither are the curled up wires coming from it. I would trace it and see where it leads, has to be powering some kind of accessory. Probably aftermarket fog lights or a train horn Dont worry about pulling the injectors, they are 24lbs, the car would run like absolute crap with a MAF calibrated for 24lbers running with something other than 24lb injectors, and they are definitely not the stock orange 19lbers.
 

cenok is family

15 Year Member
Jun 25, 2003
1,409
69
79
Norman, Ok
Nov 16, 2012
#18
  • Nov 16, 2012
  • #18
they definitely look like faded blue injectors which would be 24# injectors. like toolow91 said, as well as a proflow maf calibrated for 24# injectors. looks like a generic cold air. can't tell on the headers. if they're bbk, they'll have a one piece flange and have a "bbk" plaque welded to one of the primaries on the driver's side. if they are individual flanges, then most likely they are MAC. could be some other brand as well, just giving you some ideas. there is a relay on the driver's side that isn't factory. trace it and see what it goes to. the rest looks to be completely stock.

and FYI, yellow top factory injectors are 19#'s
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Nov 16, 2012
#19
  • Nov 16, 2012
  • #19
 

Attachments

  • blue.webp
    33.2 KB · Views: 132

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Nov 16, 2012
#20
  • Nov 16, 2012
  • #20
 
Reactions: 88LX5.Oh and mob
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

92 LX 5.0 what items to change to prevent becoming stranded?
  • Ricomondo
  • Mar 13, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
880
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 5, 2025
Noobz347
S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
828
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
spilly
S
S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
W
FoxBody Gauge Cluster - What would you pay?
  • wildstang17
  • Jun 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
275
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 26, 2025
Mustang5L5
J
Engine Running like crap :(
  • justadude07
  • Sep 27, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
354
Fox 5.0 Mustang Tech Oct 19, 2025
DadLife0724
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?