Here is what I have on my N/A car... what else can I do for more HP?

Tobias00GT · Dec 12, 2004

I have:
Accufab Plenum
Accufab 75mm TB
Steeda Underdrive Pullies
Diablo Sport Chip
Bassani X-Pipe /w Hi flow cats
Magnapack Catback
3.73 gears
And I have a bunch of suspension work done

Besides Nitrous, a S/C... what other bolt ons are out there that can help me out?

I heard the K&N Desencharger is not bad.. I'm told the 80mm C&L isn't worth it.

I was thinking I might get some new agressive cams... I'm told that would give me about 10 more rwhp. I would love to get my heads Ported and Polished... and do the cams at the sametime but I believe that is out of my price range.

Any suggestions?

tomustang · Dec 13, 2004

long tubes, p&p the heads and get some aggressive cams. these engines aren't the best for making big power w/ out and adder

TeriiK · Dec 13, 2004

if you want great bolt on power for a mustang, go buy a 5.0.....seriously.

its a pain in the ass to get bolt on power from our cars, but heres your next step. dont bother with cams, the crap intake manifolds we have will choke them. go get some Longtube headers, you'll need a new X pipe but you would want a Dr Gas anyway with the longtubes. seriously, this will be the best money you spend on your car. might want to pick up a K&N FIPK II intake for the car, since u have the plenum and whatnot.

Tobias00GT · Dec 13, 2004

TeriiK said:
if you want great bolt on power for a mustang, go buy a 5.0.....seriously.

its a pain in the ass to get bolt on power from our cars, but heres your next step. dont bother with cams, the crap intake manifolds we have will choke them. go get some Longtube headers, you'll need a new X pipe but you would want a Dr Gas anyway with the longtubes. seriously, this will be the best money you spend on your car. might want to pick up a K&N FIPK II intake for the car, since u have the plenum and whatnot.

Yeah I was thinking my next mods would be LT headers and the K&N FIPK II . Why would I need a new X Pipe? I love the Bassani X-Pipe... it is great.

Thanks

98 convertable · Dec 13, 2004

Tobias00GT said:
I have:
Accufab Plenum
Accufab 75mm TB
Steeda Underdrive Pullies
Diablo Sport Chip
Bassani X-Pipe /w Hi flow cats
Magnapack Catback
3.73 gears
And I have a bunch of suspension work done

Besides Nitrous, a S/C... what other bolt ons are out there that can help me out?

I heard the K&N Desencharger is not bad.. I'm told the 80mm C&L isn't worth it.

I was thinking I might get some new agressive cams... I'm told that would give me about 10 more rwhp. I would love to get my heads Ported and Polished... and do the cams at the sametime but I believe that is out of my price range.

Any suggestions?

Check out my mods...It depends on if you are doing the work yourself or not. If you do the work yourself, you can find used ported heads and used cams at half the price. I ran 297 RWHP 330 RWTQ without pulleys and cold air intake. The engine was warm from a 500 mile drive as well. With the engine cold, I probabally would have ran 305 RWHP. Most of my parts are used. Just something to think about.

98 convertable · Dec 13, 2004

TeriiK said:
if you want great bolt on power for a mustang, go buy a 5.0.....seriously.

Could not have said it better myself

TeriiK · Dec 13, 2004

98 convertable said:
Could not have said it better myself

yeah i feel the same way....

Tobias, you'll want a Dr. Gas cuz A) it will yeild more HP than a Bassani with the Longtube B) you'll have to shorten the Bassani to make it work and C) it sounds so goddamn sexy

seriously, LT's with a Dr Gas X, most amazing thing ever.

Darkhorse845 · Dec 13, 2004

Yes if you want great bolt on power for a mustang get a 5.0
for real!

Stang|ess · Dec 13, 2004

If you dont plan on putting a poweradder, get rid of the 3.73 gears. 4.10's atleast.

TeriiK · Dec 13, 2004

Stang|ess said:
If you dont plan on putting a poweradder, get rid of the 3.73 gears. 4.10's atleast.

this would be to such little gain, for so much money, its a total waste of time. 3.73's are fine.

tomustang · Dec 13, 2004

TeriiK said:
this would be to such little gain, for so much money, its a total waste of time. 3.73's are fine.

? such bigger gain you mean. if i wasn't going the s/c route i would swap my 3.73's for the 4.10's in a hoofbeat. 300 total for 4.10's (FRPP) and install is not 'so much money'

nickthegenius · Dec 13, 2004

TeriiK said:
if you want great bolt on power for a mustang, go buy a 5.0.....seriously.

its a pain in the ass to get bolt on power from our cars, but heres your next step. dont bother with cams, the crap intake manifolds we have will choke them. go get some Longtube headers, you'll need a new X pipe but you would want a Dr Gas anyway with the longtubes. seriously, this will be the best money you spend on your car. might want to pick up a K&N FIPK II intake for the car, since u have the plenum and whatnot.

OK....so I have a few questions for you.

1. You're not Mustanglife by any chance are you?

2. What does your car dyno w/o the nitrous? Somehow I bet its not in the 285-300 range (or 315-330 range with ported heads) it would be if it had a good set of cams in it.

3. You're suggesting a CAI for performance?

4. Keeping 3.73s for a N/A car is a good idea and 4.10s will make a small difference?

5. What about the P51 and Bullit intakes? Are they too restrictive for you?

I think I hear the baby Jesus crying....

340.29m/s · Dec 13, 2004

JonJon · Dec 13, 2004

yeah, mild cams do nothing
http://www.modulardepot.com/?show=articlesdet&aid=25

i'm thinking aboot VT stage 1s

nickthegenius · Dec 13, 2004

JonJon said:
yeah, mild cams do nothing
http://www.modulardepot.com/?show=articlesdet&aid=25

i'm thinking aboot VT stage 1s

Stage IIs do nothing either.

Here is an '00 GT with the following mods:

- Weld-in Flowmaster mufflers
- Comp valve springs
- VT Stage II cams

Before cams: 236 RWHP
After cams: 264 RWHP

http://forums.modulardepot.com/showthread.php?s=&threadid=19084

I guess nearly 30hp is nothing

Z28 KILR · Dec 13, 2004

Timing adjuster, cams, long tube headers just to name a few. Ditch the 3.73s for some 4.10s.

JonJon · Dec 13, 2004

nickthegenius said:
Stage IIs do nothing either.

Here is an '00 GT with the following mods:

- Weld-in Flowmaster mufflers
- Comp valve springs
- VT Stage II cams

Before cams: 236 RWHP
After cams: 264 RWHP

http://forums.modulardepot.com/showthread.php?s=&threadid=19084

I guess nearly 30hp is nothing

yeah seriuosly i'd do stage 2's if spring swap didn't cost so much...

WhiteDevil69 · Dec 13, 2004

TeriiK said:
if you want great bolt on power for a mustang, go buy a 5.0.....seriously.

its a pain in the ass to get bolt on power from our cars, but heres your next step. dont bother with cams, the crap intake manifolds we have will choke them. go get some Longtube headers, you'll need a new X pipe but you would want a Dr Gas anyway with the longtubes. seriously, this will be the best money you spend on your car. might want to pick up a K&N FIPK II intake for the car, since u have the plenum and whatnot.

do you own the Fast and the Furious by any chance??

Tobias00GT · Dec 13, 2004

I think I might go with VT Stage I cams!!!

Sounds good to me. I'm also looking into buying P&P heads off e-bay...

nickthegenius · Dec 13, 2004

Tobias00GT said:
I think I might go with VT Stage I cams!!!

Sounds good to me. I'm also looking into buying P&P heads off e-bay...

Who are they done by? Make sure it is someone reputable and try to stay away from Patriot. Although I haven't had first-hand experience with them, there have been numerous reports of exhaust seats falling out of the heads and in turn causing bigger problems.

Here is what I have on my N/A car... what else can I do for more HP?

Tobias00GT

tomustang

Psychotic Member

TeriiK

New Member

Tobias00GT

98 convertable

New Member

98 convertable

New Member

TeriiK

New Member

Darkhorse845

Banned

Stang|ess

seeking cyber partner(s)

TeriiK

New Member

tomustang

Psychotic Member

nickthegenius

Active Member

340.29m/s

New Member

JonJon

nickthegenius

Active Member

Z28 KILR

JonJon

WhiteDevil69

New Member

Tobias00GT

nickthegenius

Active Member

Similar threads

Here is what I have on my N/A car... what else can I do for more HP?

Psychotic Member

New Member

New Member

New Member

New Member

Banned

seeking cyber partner(s)

New Member

Psychotic Member

Active Member

New Member

Active Member

New Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency