Hey guys , 1ST mustang gt

sgt.scared · Feb 19, 2010

I would like to up my ets, but with a limited buget. [it will be a work in progress over time ] its basicly stock now.
i have now..
5.0
k n filter
255i fuil pump [ i was tolded when i bought it]
headers
flo masters 2.560 pipe H
273 gears
5 speed
running 235 45 r17 tires
eibach pro lowering kit , Steeda's Caster Camber plates, Sub Frame Connectors

i will drive it every day but will go to the track too.
I dont want to look bad at the track , help me out guys......

Thank u all.

fiveohwblow · Feb 19, 2010

Driver mod

JK

I know its more than likely a 255 lph fuel pump. I would say go with 3.73 gear ratio and ditch the 2.73. Good first mod. What are the et's you want? That will help us determine what you should get.

Welcome!

sgt.scared · Feb 19, 2010

Are track is 1/8 mile , i would like about a 8.0 to 8.5 or so...

94gtfreak · Feb 19, 2010

First off

Looks like a nice hatch you've got!

I'd definitely go with a good set of gears and if your budget allows, grab a set of GT-40 heads and intake will also help.

Is your car still running the factory mid-pipe with cats?

lancec2c30 · Feb 19, 2010

If you wanna go fast cheap, I say throw a set of Mickey Thompson slicks on some 10 holes, and run a Zex dry nitrous setup with a 100 shot.

Celeb · Feb 19, 2010

Welcome to the site. +1 on the gears and possibly some explorer heads and intake. I saw you said a 355 fuel pump, most likely a 255, in which case fuel delivery is probably not an issue at this point. A set of slicks wont hurt either.

anthony hill · Feb 20, 2010

i got a set of P heads if interested pm me! O and +1 on the gears and open up that exhaust if its not already! Car looks good man

sgt.scared · Feb 20, 2010

thanks guys . what cam works best with the heads you mention? [ names and size] or do i need 1 ,will factory 1 work well with the heads u mention? o 3.73 or 4.10 for my everyday driver /strip car ???

O i updated whats all in or on or underneath my car if thats helps you help me...

5.0 engine series E MFI OHV
trans 5 speed T5OD 2qrbb trans id 2
k n filter
255i fuil pump
headers
flo masters 40s 2.560 pipe H
273 gears limited slip
running 235 45 r17 tires
eibach pro lowering kit , Steeda's Caster Camber plates, Sub Frame Connectors

anthony hill · Feb 20, 2010

i would say 3:73s i have 4:10s and a five speed and its quick out of the hole but then thats it i run like 80mph at 3 grand i wish i had just a lil more gear. o and do you live somewhere where you dont need emissions?

sgt.scared · Feb 20, 2010

a small town in arkansas called paragould of about 20000 or so. Dont think they care around here. My 4 by 4 has blackjack headers and 18 inch glass packs on 2.75 pipes and thats it. What about 3.90 gears ??

FoxGT87 · Feb 20, 2010

3.90's aren't bad i wouldn't go any steeper than that though.

sgt.scared · Feb 20, 2010

O i can bury the 140 mph with 2.73. Dont know what it tops out at since it dont reg any more...but i broke the speed gadge,it moves alittle and bounces to i ld say most of the time its off by 25 or 30 miles an hour now. But the mileage seems to be right still yet.

94gtfreak · Feb 20, 2010

3.73's or 3.90's are the way to go.

For they cam I'd go with a Trick Flow Stage 1 cam.

TwoToneHatch · Feb 20, 2010

Looks like a nice car . +1 on the gears I have 3:73's in my '89 and they are perfect.

BlackGT89 · Feb 20, 2010

Welcome, and nice looking car man ! Definetly gears would be a very dramatic improvement. I have 3:55's but I will go with 3:73's if I change them again. If you can get away with an off-road H-Pipe or X-pipe, that would help a lot. Underdrive pulleys are a noticable improvement, as is an electric fan and an aluminum driveshaft. I've never used nitrous, but if you just want to look good at the track, slicks and nitrous would certainly do it. But then the tranny becomes the weak link and possibly the rear end. Good luck !

7upstang91 · Feb 21, 2010

I would say a good set of heads if you want to do everything right and budget permits. Decent cam and good tune. 3.73s and drag radials, sticks with be to much for that T-5. Good solid clutch.

90notch_5.0 · Feb 22, 2010

lancec2c30 said:
If you wanna go fast cheap, I say throw a set of Mickey Thompson slicks on some 10 holes, and run a Zex dry nitrous setup with a 100 shot.

+1^^^

rednotch88 · Feb 22, 2010

some phone dialers with M/T's,3.73 or 4.10's like stated a billion times already.tighten up them torque boxes.
Turbo Kits for Ford Mustangs tons of fun here.

sgt.scared · Feb 24, 2010

what and where r these torque boxes???

O tks for the turbo hook up!

sgt.scared · Feb 24, 2010

o and if i run a turbo or supercharger do i have to have the computer redone ????

Hey guys , 1ST mustang gt

sgt.scared

Member

Attachments

fiveohwblow

Official Member

sgt.scared

Member

94gtfreak

Active Member

lancec2c30

Member

Celeb

anthony hill

New Member

sgt.scared

Member

anthony hill

New Member

sgt.scared

Member

FoxGT87

sgt.scared

Member

94gtfreak

Active Member

TwoToneHatch

Active Member

BlackGT89

Member

7upstang91

90notch_5.0

Member

rednotch88

Member

sgt.scared

Member

sgt.scared

Member

Similar threads

Hey guys , 1ST mustang gt

Member

Attachments

Official Member

Member

Active Member

Member

New Member

Member

New Member

Member

Member

Active Member

Active Member

Member

Member

Member

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency