HID Lights

ninetyfiveGT · Dec 16, 2005

I was just wondering if you guys knew if there was an HID kit available for our cars. If so:
-How much are they and where can I find one?
-Are modifications required to use these kits?
-Do the bulbs run too hot for a regular headlight housing? I have clear cobra style lights and was wondering if these housings are any good for HID.
-I can't directly see the bulbs in my headlight housings (they have some sort of reflector in front of them), will this interfer with the HID bulbs and make them dimmer or is this just normal?

Sorry for all the questions guys, I'm pretty much a newb when it comes to this headlight stuff.

Thanks

sade04 · Dec 16, 2005

i dont know too much about this but our reflectors were made for regular halogen lighting. You could always get some kit off of ebay but since our reflectors werent made for HIDs youll pretty much blind oncoming traffic. The beam cutoff wont be correct at all. You will not get that crisp line of light you should get with HID lighting. Like this guy here, he just got a regular kit for a few hundred bucks but you can see the light disperses in all directions (this is what causes glare and why people shouldnt use regular HID kits in halogen housings) instead of straight ahead.http://www.svtperformance.com/forums/showthread.php?t=183803&highlight=HID

Heres another link about why you should not get a HID "kit"
http://www.svtperformance.com/forums/showthread.php?t=216043&highlight=HID

...But this guy here did it the correct way http://www.svtperformance.com/forums/showthread.php?t=236750&highlight=HID

he had his housings sent out to a company that specializes in retrofitting hid projectors. Some people do it themselves. Heres a link to the company that does this sort of work.... http://www.illusion-lighting.com/ in the gallery section you can see pics of the lighting against a wall and you can see how sharp the cutoff line is when HIDs are done correctly. Doing it this way does cost around $1000.

and no these lights dont run too hot for our stock housings, they actually run cooler than our stock lighting.

RacEoHolic330 · Dec 16, 2005

thank you sade04 for providing that accurate information. I cannot stand it when people throw an HID kit into a stock reflector housing. I retrofitted a pair of bmw 3 series bi-xenon projectors into my fox body housing and couldn't be happier. If you're gonna do it, do it right the first time...

Blackened302 · Dec 17, 2005

so when they're "retro-fitted" they're inside a projector housing rather than sticking in the HID bulb inside the stock housing?

sade04 · Dec 17, 2005

Ram000 said:
so when they're "retro-fitted" they're inside a projector housing rather than sticking in the HID bulb inside the stock housing?

No when theyre retro-fitted, there are HID projectors inside regular stock housings

OrangeMustangGt · Dec 17, 2005

do what i did, and steal a new nissan car and get the setup from that.

Blackened302 · Dec 17, 2005

sade04 said:
No when theyre retro-fitted, there are HID projectors inside regular stock housings

yeah, that's what i meant. that's a good bit of info--thanks sade .

blk9450 · Dec 18, 2005

GreenMustangGt said:
do what i did, and steal a new nissan car and get the setup from that.

more info necessary

ninetyfiveGT · Dec 19, 2005

Thanks for all the replies guys. This is exactly why I wanted to ask about it before going ahead and buying something. $1000 is more than I really want to spend for lighting, I think I will just stick with my silverstars and add some driving lights or something.

Thanks again

HID Lights

ninetyfiveGT

New Member

sade04

Member

RacEoHolic330

I like to dress like a pretty girl

Blackened302

Active Member

sade04

Member

OrangeMustangGt

Blackened302

Active Member

blk9450

ninetyfiveGT

New Member

Similar threads

HID Lights

New Member

Member

I like to dress like a pretty girl

Active Member

Member

Active Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency