I finally have my car running after a long build process. I recently switched the t-stat from a 180* to a 160* hoping this would help the problem. The temp now goes up slowly and continues going to about 210. I shut off the car to be on the safe side. I do have an underdrive pulley on the water pump. I also have aluminum heads with a power adder on the car, I think I remember reading that aluminum heads cause the car to run hotter.
I have also added water wetter to the car to help reduce temp. Would would be another cause or something to look into about this?
I have also added water wetter to the car to help reduce temp. Would would be another cause or something to look into about this?