Horsepower?

[95GTLaser]

I have recently purchased quite a few parts waiting for the winter to install. I have accumulated GT 40s not Ps, a BBK 70 mm Throttle Body, 95 Cobra Upper/Lower, 24lb injectors, Pro M 75 MAF, BBK Shorties, O/R H pipe, Flowmaster Catback, and to finish it off 3.73s for the rear. What do you guys think horsepower will be to the wheels? And are there any other parts that i should get to finish this project off?

 

[95GTLaser]

Forgot the BBK CAI. What do you think guys/gals?

 

[tstang21]

cant really say. im assuming you might hit 250rwhp at best. the cobra intake makes a great torque band. depends on how its tuned. itll be fun in the begining once you start

 

[Pokageek]

245rwhp

 

[final5-0]

I have recently purchased quite a few parts waiting for the winter to install. I have accumulated GT 40s not Ps, a BBK 70 mm Throttle Body, 95 Cobra Upper/Lower, 24lb injectors, Pro M 75 MAF, BBK Shorties, O/R H pipe, Flowmaster Catback, and to finish it off 3.73s for the rear. What do you guys think horsepower will be to the wheels? And are there any other parts that i should get to finish this project off?

You have a lot of the same parts as a typical 94-95 Cobra

The differences would be

1) meter
2) tb
3) OR mid pipe
4) shorty headers

I don't see much of a gain ... if any ... over the Cobra power with 1 & 2

IMHO ... #3 would be the big gain item followed by #4

I'd say about 10 more than what ever a Cobra puts out

I would'a kept the OEM tb and put that money towards a cam
and some springs that would support it

Then again ... it has ... ALL TO DO WITH ... your specific application :Word:

Grady

 

[fasterthanthem]

BTW, is this in the right section?

 

[final5-0]

BTW, is this in the right section?

Would be more suited
and
Catch more eyes in the tech forum IMHO

Grady

 

[greenlantern]

Ok maybe I am missing something here so correct me if I am wrong. If a stock Cobra makes 240 flywheel hp. And like grady said this combo is almost the exact same combo minus the shorties and off road H pipe. Add these two items in and give say another 10hp-15hp. How do we arrive at 245-250 rear wheel hp? I think you guys mean fwhp correct. Because if hes putting down that much rear wheel hp that would mean at hes at 280-285fwhp.

I think the correct answer here is about 213-215rwhp.

 

[final5-0]

Ok maybe I am missing something here so correct me if I am wrong. If a stock Cobra makes 240 flywheel hp. And like grady said this combo is almost the exact same combo minus the shorties and off road H pipe. Add these two items in and give say another 10hp-15hp. How do we arrive at 245-250 rear wheel hp? I think you guys mean fwhp correct. Because if hes putting down that much rear wheel hp that would mean at hes at 280-285fwhp.

I think the correct answer here is about 213-215rwhp.

I can't be certain
as
I've never paid much attention to all those Cobra threads
but
IIRC ... They were a bit under rated from the factory

IIRC ... I've seen some OEM equipped Cobra owner's report .......

Dyno pulls in the range of 235 to 245

Honestly ... These "How much HP threads"? can be very misleading :Word:

So much can come into play that can + or - the results

Never the Less

You can kinda go by the trends IF you gather enouth data

Grady

 

[Stanger007]

Based off the cars I've dyno'd, I'd say well tuned around 225-235rwhp on a MustangDyne dyno.

Wes

 

[2002BLGT]

with a good cam , and good tune 240-250 rwhp , like its listed with stock cam ? didnt see one listed , I would say 220-225 rwhp at best

 

[RoushTbird]

port workz is selling a 302 topend kit that comes with strikeforce heads, timing chaing, emerson cam, and all the bolts and gastkets. Its only 1400 bucks. Search top end kit on ebay. The guys name is brian. that will give you the HP you are looking for. GT 40's are barley a stock upgrade. I also suggest going with LT BBK headers, or any long tube for that matter.

 

[2002BLGT]

port workz is selling a 302 topend kit that comes with strikeforce heads, timing chaing, emerson cam, and all the bolts and gastkets. Its only 1400 bucks. Search top end kit on ebay. The guys name is brian. that will give you the HP you are looking for. GT 40's are barley a stock upgrade. I also suggest going with LT BBK headers, or any long tube for that matter.

kit comes with a carb intake , be cheaper for buy the heads for 800 with free pushrods hes offering and then buy a better cam and good used EFI intake , but if you do go with those heads , but be advised those heads with 2.02 valves wont work on stock pistons ...and with a 200cc intake runner are over kill for a bolt on car ....

 

[vladasap]

i made 231rwhp & 270rwtq which is pretty OK, nothing impressive but all that plus i have 4.10s...not for nothing but the car moved
this is with stock heads, stock cam, cobra u/l manifold, 76mm C&L and 24lbs inj