Interior and Upholstery How are the new cup holder consoles working?

7991LXnSHO · Jun 15, 2020

I have a new console top with no ash tray and with cup holders (For a 91) and paint from two Christmases ago. I want to install it now I found everything again. I plan to put in two power outlets, not because I am a two fisted smoker, but charging two phones or an iPod and a game for the kids sounds handy.
Where have you put the lighter socket or USB power plugs, and have you wished you had put them elsewhere? Pics of what works well are appreciated!

Mustang5L5 · Jun 15, 2020

There's one that has the power ports in it now

Fox Body Cup Holder Center Console Panel - Gray | 1987-93 Mustang

Eliminate the ashtray in your 1987-1993 Fox Body Mustang with this gray, Daniel Carpenter Restoration cup holder center console panel from LMR!

lmr.com

I prefer the ports be hidden. I wired in a 12v to USB unit behind the radio and then snuck the cable under the console next to the seat. Now that I got a new phone, I was looking at putting a wireless charging pad under the large storage area.

7991LXnSHO · Jun 15, 2020

I got one before they had the outlets. Is this location easy to live with in a manual with an armrest?

ThinBlue502 · Jun 15, 2020

I’ve got the one with outlets. I love it. Holds a 32oz metal Tervis perfect in the larger recessed area, and holds a smaller cup or 12oz soda can perfect in the deeper part. Having the 12v outlet and USB ports both is nice. When my wife, daughter, and I road trip, we have my daughters DVD player plugged in the 12v, and both my wife‘s and my own phones plugged into the USB ports.

Two ice cold drinks in the cup holders, devices powered, almost like a modern car...
or something. I used to spill drinks all the damn time trying to squeeze cups inbetween the e-brake and the seat, or inbetween your legs. Ugh.

7991LXnSHO · Jun 15, 2020

I have ended up with my drink in the back seat or on the front floor too much.
I will look into a hidden port, but I’ll probably get a new radio with a port built in, someday.
Thanks! Off to work on it.

96pushrod · Jun 15, 2020

My friend put his cup holder console in and it looks great. I’ve had one on the shelf for a month now. Just haven’t had the spare time to put it in. Maybe tomorrow I’ll try for it when I install my ball valve setup.

7991LXnSHO · Jun 16, 2020

I am drawing a blank here. What ball valve belongs in a Mustang? Is it running the Kegerator in the hatch?

Blown88GT · Jun 16, 2020

7991LXnSHO said:
I have a new console top with no ash tray and with cup holders (For a 91) and paint from two Christmases ago. I want to install it now I found everything again. I plan to put in two power outlets, not because I am a two fisted smoker, but charging two phones or an iPod and a game for the kids sounds handy.
Where have you put the lighter socket or USB power plugs, and have you wished you had put them elsewhere? Pics of what works well are appreciated!

Does this mean the new console top has no cigar lighter holder or DC power socket?
I still have the factory console. I use a 3-way DC splitter.

Am currently working a secondary one that will only energize with the ignition on. The existing DC socket is shared with the horn & don't want to cut any wires.

The cup holders are these.

7991LXnSHO · Jun 16, 2020

I have an unused cup holder like that somewhere.
The first of the new console tops came out without sockets installed. Then another supplier soon sold what looks like the same thing with the two outlets installed.
Where did you mount the 3 hole power thing so it was not in the way?

Mustang5L5 · Jun 16, 2020

There are two cups holder consoles on the market. LMR sells both. One features a power and USB port, the other is blank.

I have the blank one

7991LXnSHO · Jun 16, 2020

@Mustang5L5 If you say they are both LMR, I will not argue. I was disappointed when they came out with the chargers already installed.
So did you put a port in the side or under the dash? GPS and Tunes are important when I’m driving. I got spoiled quickly not having a map with sticky notes for directions, and not changing CD’s or tapes on trips.

BlakeusMaximus · Jun 16, 2020

Ive got the blank one as well. I like it more than I thought I would. I got tired of using the ebrake handle and seat method. When my daughters juice went down the side of the trans tunnel, I knew it was time.

Mustang5L5 · Jun 16, 2020

7991LXnSHO said:
@Mustang5L5 If you say they are both LMR, I will not argue. I was disappointed when they came out with the chargers already installed.
So did you put a port in the side or under the dash? GPS and Tunes are important when I’m driving. I got spoiled quickly not having a map with sticky notes for directions, and not changing CD’s or tapes on trips.

I wired one under the dash and just snakes the iPhone cable under the console. I only need it for phone so it covered my needs. Just got a 12v to usb off Amazon

Blown88GT · Jun 16, 2020

7991LXnSHO said:
I have an unused cup holder like that somewhere.
The first of the new console tops came out without sockets installed. Then another supplier soon sold what looks like the same thing with the two outlets installed.
Where did you mount the 3 hole power thing so it was not in the way?

In the cubby below the radio. Not mounted, just lays there.

I have a 2-way spliter on the main power port, 1 for the 3-way, the other for the laptop DC power adapter.
I have the following that need power:
1. Dash cam
2. GPS
3. Laptop for Megasquirt
4. Phone, misc

The dash cam & GPS are what I want to turn on only when the engine is started, since I almost always forget them.

96pushrod · Jun 18, 2020

7991LXnSHO said:
I am drawing a blank here. What ball valve belongs in a Mustang? Is it running the Kegerator in the hatch?

Lol. I was going to fab up a mount for a nitrous ball valve when I put my console in. Figured I’d have the console out so I might as well pull the carpet back and weld something in.

Ended up just putting the console in, valve will have to wait.

I do really like having cup holders now.
Anyone else notice the console sits a little closer to the e brake on the L/H side? Not really a big deal, just something I noticed.

7991LXnSHO · Jun 19, 2020

So what is the black circle of plastic for in front of the ash tray? I popped the center and tried to lift the edge like a body plug, and that did not work. Was it for a factory nitrous trigger or convertible top switch?

General karthief · Jun 19, 2020

Neither.
No factory installed nitrous
Convertible switch is on the instrument panel opposite the light switch.

7991LXnSHO · Jun 19, 2020

The nitrous is a joke, but I still wonder WTH the round, black plastic thingy is for.

Mustang5L5 · Jun 19, 2020

Not original. Pop the console off and have a look.

7991LXnSHO · Jun 19, 2020

Then it may be a plug from a long gone nitros switch. I have found a few bits and pieces that make me wonder. Thanks.

Interior and Upholstery How are the new cup holder consoles working?

7991LXnSHO

wanna catch the space herp

Mustang5L5

That is…until I whipped out my Bissell

Fox Body Cup Holder Center Console Panel - Gray | 1987-93 Mustang

7991LXnSHO

wanna catch the space herp

ThinBlue502

7991LXnSHO

wanna catch the space herp

96pushrod

I think they're a little easier to get off

7991LXnSHO

wanna catch the space herp

Blown88GT

7991LXnSHO

wanna catch the space herp

Mustang5L5

That is…until I whipped out my Bissell

7991LXnSHO

wanna catch the space herp

BlakeusMaximus

Still got to try a little lube on my speedo head

Mustang5L5

That is…until I whipped out my Bissell

Blown88GT

96pushrod

I think they're a little easier to get off

7991LXnSHO

wanna catch the space herp

General karthief

wonder how much it would cost to ship you a pair

7991LXnSHO

wanna catch the space herp

Mustang5L5

That is…until I whipped out my Bissell

7991LXnSHO

wanna catch the space herp

Similar threads

Interior and Upholstery How are the new cup holder consoles working?

wanna catch the space herp

That is…until I whipped out my Bissell

wanna catch the space herp

wanna catch the space herp

I think they're a little easier to get off

wanna catch the space herp

wanna catch the space herp

That is…until I whipped out my Bissell

wanna catch the space herp

Still got to try a little lube on my speedo head

That is…until I whipped out my Bissell

I think they're a little easier to get off

wanna catch the space herp

wonder how much it would cost to ship you a pair

wanna catch the space herp

That is…until I whipped out my Bissell

wanna catch the space herp

Similar threads

Privacy & Transparency

Privacy & Transparency