how do i bypass the neutral safety switch (t-5 conversion)

[detroitmuscle99]

#1ok, so i just got done with my t-5 conversion from aod on my 90 lx, i cant start the car without jumping the starter solonoid. im not in need of a clutch switch/neutral safety swith so how do i bypass this?



#2 looking at the scematics i should run the pink/white wire on the column to the wire on the top of the solonoid, sound right?

 

[89MustangGX]

You should not need to run any wires for this. I believe all you will have to do is use the jumper plug that came out of the harness that plugs into your pedal assembly -- simply put it back in.

Although something else seems wrong if it doesn;'t even start now with the clutch pushed...what all did you do for your wiring changes already?

 

[detroitmuscle99]

nothing, its still stock aod

 

[Zenix]

Did you use the 'clutch down' switch on when you did the swap? If the button gets broke on that (like it did on my manual stang) I just unplugged the switch and ran a wire from one prong to the other (so there is continuity) until I got a new one from the dealer. Other than that I don't know anything about the AOD trannys...you should of just bought a t-5 car instead of doing the swap in my opinion. Good luck.

 

[89MustangGX]

nothing, its still stock aod

Does this mean you have nothing plugged into the T5 or clutch pedal assembly?

 

[detroitmuscle99]

you should of just bought a t-5 car instead of doing the swap in my opinion. Good luck.

yeah, unfortunately this was the car i wanted, a grey notch, and a great deal, i wasnt gonna be to picky about the transmission, the aod held up fine, just got a great deal on the t-5 stuff, im into the swap about $50 if you put what i sold the aod for up against what i spent, and the car runs great.

anyhow, good idea, ill just reuse the old bypass from aod pedal assembly. thanks!