how do i know what spacers to use on my mm caster camber plates

[fivespeedsteed]

you read it. how do i figure such a thing out. when my friend and i install them will it become apparent or something i need to know before hand.

tokiko blues and c springs if that helps.

 

[HISSIN50]

Do you have the instructions (if not, they're on the site)?

It is pretty intuitive (I had to play with the spacers as well - non-MM plates).

 

[fivespeedsteed]

no i bought them new, but from a guy on corral. got them for a good price. thanks for the idea though

 

[4G-KDMP]

There has to be at least 1 thin spacer under the bearing.

 

[GroverDill]

Call the MM tech support line, they will help you and they are great people to deal with. Only costs you a few pennys for long distance.

 

[TenorPlayinGuy]

You start with a small spacer at the bottom, with the other three above the plates, then slowly close your hood to see if you have the required 1/8" clearance, (use something like play-doh or putty) if you don't have enough clearance, take the next size and place it below the plates on the strut shaft. Thats all.

The directions are on the website and are very detailed.

Here's a link to yours (I hope since your sig states a 1990, and i'm assuming you got the right kit)

http://www.maximummotorsports.com/content/install/pdf/front_susp/MMCC9093r6.pdf