How do you clean the maf?

xsivpwr · May 20, 2005

What is the reccomended proceedure to cleaning the maf?

89 Saleen#455 · May 20, 2005

Can of Dustless Keyboard cleaning propellant or my air compressor with a blow gun attachment. Some people recommend the Q-tip method with cleaning solution (electronic cleaning fluid which doesn't leave a residue), but I don't recommend using any solvents when cleaning the MAF. Just my $0.02

stang22 · May 20, 2005

Q-tip and alchohol or contact cleaner for me. No problems here...

Tim

Curse · May 20, 2005

stang22 said:
Q-tip and alchohol or contact cleaner for me. No problems here...

Tim

Works everytime

TheBocSez · May 20, 2005

stang22 said:
Q-tip and alchohol or contact cleaner for me. No problems here...

Tim

Same here

vristang · May 20, 2005

I would not recommend touching the wire with anything. It is very sensitive to elongation and can break fairly easily.

I sprayed mine with some windex years back. Worked fine.

I may be wrong but aren't these wires self cleaning? I thought that after the car was shut off a current was sent through the wire for a breif time. This heats the wires and burns off any foreign matter.

stang22 · May 20, 2005

vristang said:
I may be wrong but aren't these wires self cleaning? I thought that after the car was shut off a current was sent through the wire for a breif time. This heats the wires and burns off any foreign matter.

What happens is people clean thier air filters and re-oil them. Sometimes that oil gets on the sensor and stays put, until you clean it. I know it heats up, but I don't know if it is enough to actually burn anything off. The sensor is sensitive yes, but the wires are pretty stout. Strong enough to be cleaned with a Q-tip.

Tim

NakedRaygun · May 20, 2005

Carb Cleaner.

live2ride204 · May 20, 2005

I just talked to a mustang tech about mine cause i think its bad but he said to use brake clean or something that has no lubricant or oil on it. My $.02 as well.

vristang · May 20, 2005

stang22 said:
What happens is people clean thier air filters and re-oil them. Sometimes that oil gets on the sensor and stays put, until you clean it. I know it heats up, but I don't know if it is enough to actually burn anything off. The sensor is sensitive yes, but the wires are pretty stout. Strong enough to be cleaned with a Q-tip.

Tim

Yeah, I know a lot of people clean it that way and don't have any problems. I will never suggest this to anyone though as I personally do not feel that using a Q-tip (or anything else for that matter) is necessary. Solvents do just fine. There is no advantage, and there is increased risk. Just my opinion.

The guy who suggested Brake cleaner is probably the smartest one here, NO RESIDUE.

xsivpwr · May 23, 2005

Well, I cleaned mine over the weekend. All I had for a cleaner was windex. So I didnt have much of a choice but to use the q-tip. At first i just wet the q-tip and just kinda wiped it down a little bit. Then I realized that the wire wasnt really supposed to be BROWN. After bout 5 min of light scrubbing, I have 2 nice silver wires now. Car seems to be running quite a bit better now too.

Thanks guys

dvs bullet · May 23, 2005

I just used brake cleaner and a piece of kleenex that I rolled up so you don't put too much pressure on it and it doen't leave any cotton behind, my car improved dramatically

How do you clean the maf?

xsivpwr

89 Saleen#455

stang22

Active Member

Curse

Member

TheBocSez

New Member

vristang

stang22

Active Member

NakedRaygun

New Member

live2ride204

New Member

vristang

xsivpwr

dvs bullet

New Member

Similar threads

How do you clean the maf?

Active Member

Member

New Member

Active Member

New Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency