• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

How do you get 1.6-1.8 60ft times?

  • Thread starter Thread starter 94gtslow
  • Start date Start date Aug 7, 2005
9

94gtslow

Founding Member
Jan 26, 2002
401
0
0
Temple,Texas
Aug 7, 2005
#1
  • Aug 7, 2005
  • #1
I have some 275 40 17 bfg drag radials on tribars.

The best 60ft I have got is a 1.92 at 18 psi.

I have the eibach drag launch springs with air bag (10psi), and strange adjustible struts and shocks, Struts set at full loose, rears at 5.

Is there a certain way to launch or something that I am missing?

Any advice on how to launch and get better 60ft times?
 

slo65

New Member
May 26, 2003
448
0
0
Southern California
Aug 7, 2005
#2
  • Aug 7, 2005
  • #2
do you have a convertor? are you boggin out of the hole? all i know is 5spd so forgive me, but i just launch it at 4k and go, i find i actually spin in 1st if i just drop it hard, so i feather a little, i've pulled several 60's in the 1.8's even while spinning and 1 1.80, all stock suspension, sounds like you're not leaving hard enough
 
9

94gtslow

Founding Member
Jan 26, 2002
401
0
0
Temple,Texas
Aug 7, 2005
#3
  • Aug 7, 2005
  • #3
I usually leave at about 3k.

I do a second gear burnout, and wait untill I see smoke, then floor it out of the box.
 

stangbanger94

New Member
Apr 29, 2004
203
0
0
Bergen County, NJ
Aug 7, 2005
#4
  • Aug 7, 2005
  • #4
M/T et streets,3:73's,2nd gear burnout. I launch @ 5k, and have gotten 1.68 60'ft times.
 

mytight95

Active Member
Apr 11, 2003
2,605
0
46
Dothan,Al
Aug 7, 2005
#5
  • Aug 7, 2005
  • #5
you need lower control arms if you don't already have them..... and you can run prolly like 15lbs in those tires safely... i think...


Since you have the eibach drag springs did they lower the car ANY? sorry to hijack just figured i would ask


jason
 
Y

yellow1995Cobra

New Member
Dec 23, 2002
2,959
2
0
Massachusetts
Aug 7, 2005
#6
  • Aug 7, 2005
  • #6
Lower control arms deffinatly help, if you dont have any, just get some cheap non adjustable ones.

I think you just need to launch harder. With my old car i would launch around 5k, drop the clutch and hold on. I had a h/c/i 302 at the time(gt40 crate motor) and would pull low 1.7 60's, best being a 1.72. I had lakewood 90/10 struts and 50/50 shocks, solid lower control arms, no sway bar, and nitto 17" dr's. I have BFG's on my new car and they are MUCH better tires. No reason you shouldnt be in the 1.7 range easy..

Also, how is the track prep? That will be a major factor as well. Start with bumping your launch RPM's up a bit and see what happens.
 
You must log in or register to reply here.

Similar threads

Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
401
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 15, 2026
FastDriver
Took some pics, i do really own a mustang...
  • 2000xp8
  • Jun 20, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 6 7 8
Replies
148
Views
19K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 1, 2024
Mustang5L5
T
For Sale 2003 Built & turbo 2003 Mach 1 $9000 OBO - *Salvage Title* *Huge Mod list*
  • Turbo03Mach
  • Feb 5, 2021
  • SN95 Mustangs For Sale (1994-04)
Replies
1
Views
5K
SN95 Mustangs For Sale (1994-04) Mar 6, 2021
MattMan02GT
M
  • Locked
“Doing stuff the wrong way for the right reasons”: A related stupid story.
  • CarMichael Angelo
  • Apr 26, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2020
a91what
M
My 82 hatch 408 build
  • Miskitobyte15
  • Jun 16, 2018
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 19, 2018
Gear grabber
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?