how do you get nittos to hook!??!

UnderdogGN · Sep 14, 2006

hi, whoever has nitto drag radials can you help me out??? After my new heads i cant get them to hook like i used to...they are 275/40/17 and seem to like about 17-19 psi in them.... i used to be able to do a short 3-4 second burnout and they would dead hook with only a chirp...now it just blows them off....anyone have any little tips or tricks for nittos????? or do you think i need a stickier tire and some suspension upgrades since i have more power now??
i need all the help i can get because im supposed to race a bike soon and dont want to lose because of a crap start
thanks!!!

S&B · Sep 14, 2006

You need to get them very hot, but it sounds like you have everything set right, the psi looks good 15-20 psi.

bubba-dough · Sep 14, 2006

Are you talking about on the street or on the track? Mine hook well on the street but hook like total ass on the track.

ryan218 · Sep 14, 2006

UnderdogGN said:
hi, whoever has nitto drag radials can you help me out??? After my new heads i cant get them to hook like i used to...they are 275/40/17 and seem to like about 17-19 psi in them.... i used to be able to do a short 3-4 second burnout and they would dead hook with only a chirp...now it just blows them off....anyone have any little tips or tricks for nittos????? or do you think i need a stickier tire and some suspension upgrades since i have more power now??
i need all the help i can get because im supposed to race a bike soon and dont want to lose because of a crap start
thanks!!!

give them a good 10-15 second burnout and see what hapens.

millhouse · Sep 14, 2006

And remember...Nitto's are not known for dead hooking. The more power you make...the more it's required you know how to launch. If you have a manual your going to need to slip the clutch more.

UnderdogGN · Sep 14, 2006

hmm ill have to give the huge burnout a try. I am talking about the street here....i think they actually hook worse at the track anyway haha...but yea my car is an automatic with a big converter but ill try to get them really hot and see what happens
any more tips?!?!
thanks!!

N8Miller · Sep 14, 2006

bubba-dough said:
Are you talking about on the street or on the track? Mine hook well on the street but hook like total ass on the track.

thats basicly my description of them. if you have more than 300rwhp, your gonna have a hard time getting them to hook.

90blacknight · Sep 15, 2006

Without a decent suspension, you'll never hook.

UnderdogGN · Sep 15, 2006

as far as the suspension goes....all i have is full length welded in sub frame connectors, and eibach pro kit lowering springs which might even hurt the launch?? not to mention that its a vert...

N8Miller · Sep 15, 2006

UnderdogGN said:
as far as the suspension goes....all i have is full length welded in sub frame connectors, and eibach pro kit lowering springs which might even hurt the launch?? not to mention that its a vert...

your lowering springs are working backwards toward your Hooking goals....

stang8urimport · Sep 15, 2006

UnderdogGN said:
how do you get nittos to hook!??!

You sell them and buy BFG's or Mickey Thompsons.

Darkwriter77 · Sep 15, 2006

MM LCA's, adjustable Koni's, ditch the lowering springs, and run something with taller sidewalls, if you're not worried about giving up a little cornering ability. Maybe pick up a spare set of 15's and throw on some Mickeys...?

PRO50SC · Sep 16, 2006

15 psi and smoke 'em good!!! They'll hook, trust me.

95conv5.0 · Sep 16, 2006

are you stalling it up as high as it goes then mashing the throttle?

UnderdogGN · Sep 16, 2006

thanks for the help!!
i pretty much figured the lowering springs wouldnt help, what do you guys think about throwing the stock rear springs back on (maybe cut a bit) so it wont have too big of a rake????? Soon as i get enough money ill probably ditch the nittos anyway for BFG's but in the meentime i want to try to get it to hook with the tires on it now.....Im not even using all of the converter, basically im just on teh brake and around 2400 rpm's and then mashing it after i let off the brake and i end up sideways....I can get the converter to stall up to 3000-3200 though.... I also have a brand new set of Southside Machine Lift Bars that i could throw on...those any good!?!?
thanks!!!

90blacknight · Sep 16, 2006

It's not the Nittos. I have the extremes, not the drag radials, and I can launch hard. You don't even need to spin them too much to get them to a nice temp. Basically I think it's your suspension and possibly the driving. Invest in some nice control arms, maybe some better springs (never did like eibach).

$uperstang · Sep 18, 2006

Nitto's are AWESOME!

I keep mine at 18 PSI on the street and 10psi at the strip. Got a 1.7 60'.

Get rid of the Eibach's, put the stock springs back on and get some upper and lower control arms and you will be surprised!!!

UnderdogGN · Sep 18, 2006

I guess thats what ill have to do this week..Im just going to put the stock springs in the back and put the southsides on it and see what happens....
thanks

$uperstang · Sep 18, 2006

UnderdogGN said:
I guess thats what ill have to do this week..Im just going to put the stock springs in the back and put the southsides on it and see what happens....
thanks

Putting stock springs just in the back will not do anything for you. You want and need them up front for the weight transfer. With Eibach's up front you will have limited wheel transfer.

Flavadave4 · Sep 18, 2006

PoopDawg said:
You sell them and buy BFG's or Mickey Thompsons.

thats what i was thinking

how do you get nittos to hook!??!

New Member

I hate my CT. :(

Active Member

In just 10 years, I'll be old enough to drive!!!!

New Member

I need NOS....make it 2 of the big ones

Member

New Member

I need NOS....make it 2 of the big ones

Autozone Junkie

Resident Ranting Negative Nancy

New Member

New Member

New Member

Member

New Member

New Member

New Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency