How hard is cam install?

StLStangGT · Dec 7, 2004

I'm looking to do a cam install in the spring myself and have pretty good mechanical knowledge, just have never tried to do a cam install. How hard is it and doesn't anyone know any good sites with how to reference. Also about how long does the process take. I'm lookng to go with a mild cam that doesn't require new valve springs and whatnot. Thanks.

Rocketman · Dec 7, 2004

Several post on MD about cam installs, check it out. This is one of the better write ups for technical reference.

http://www.redpulsar.us/~coldfusion/camswap.html

BLKsteeda · Dec 7, 2004

If you don't want to go with a spring upgrade definitely look into VT Stage 1 cams. I have them in my car without a spring upgrade and I gained 33rwhp from them

JonJon · Dec 7, 2004

BLKsteeda said:
If you don't want to go with a spring upgrade definitely look into VT Stage 1 cams. I have them in my car without a spring upgrade and I gained 33rwhp from them

Did you install them yourself? 33rwhp after a tune?

Oh and what mods did you have before the cams... I'm debating cams.

Bill9000 · Dec 7, 2004

BLKsteeda said:
If you don't want to go with a spring upgrade definitely look into VT Stage 1 cams. I have them in my car without a spring upgrade and I gained 33rwhp from them

I'm looking for an agressive, "lope-type" idle, like an older muscle car would have, is there such cams for the mod engines that will do that? give it a rough idle?

how does yours sound, different thank stock? rough?

jbrown · Dec 7, 2004

a stage 2 or 3 cam will have a agresssive idle, make sure to keep in mind the bigger the cam the more power it will make up top but you will lose more down low. You will also need to upgrade your valve springs and get gears and a tune if you go with a stage 2 or 3 cam. I hear it takes about 5 hours to do an install.

Ruckus46Gt · Dec 7, 2004

hardest thing about a cam install is making sure when you take the tensioner off and making sure it doesnt move casue if you do there goes your timing and its a bitch to get back

BLKsteeda · Dec 7, 2004

Steeda did the install of my cams...the 33hp and 13tq that was gained was after a superchips tuning. The lope of the car is a mild lope but you can definitely tell there is a cam in the car...I get numerous people that come up and compliment on the sound of the cams. Before the cams I had a Steeda CAI, Accufab TB and Plenum, Steeda Intake Spacer, Steeda T/A, Steeda Underdrive Pulleys, Bassani O/R Xpipe, Steeda SS Cat Back, 3:73 and Steeda's N/A computer flash.

Defleshed · Dec 7, 2004

jbrown said:
a stage 2 or 3 cam will have a agresssive idle, make sure to keep in mind the bigger the cam the more power it will make up top but you will lose more down low. You will also need to upgrade your valve springs and get gears and a tune if you go with a stage 2 or 3 cam. I hear it takes about 5 hours to do an install.

yeah, and in some cases big ass cams require aftermarket intake and exhaust.

cams aren't tough unless you're doing the springs. doing the springs properly is just time consuming...

JonJon · Dec 7, 2004

BLKsteeda said:
Steeda did the install of my cams...the 33hp and 13tq that was gained was after a superchips tuning. The lope of the car is a mild lope but you can definitely tell there is a cam in the car...I get numerous people that come up and compliment on the sound of the cams. Before the cams I had a Steeda CAI, Accufab TB and Plenum, Steeda Intake Spacer, Steeda T/A, Steeda Underdrive Pulleys, Bassani O/R Xpipe, Steeda SS Cat Back, 3:73 and Steeda's N/A computer flash.

Darkhorse845 · Dec 7, 2004

BLKsteeda said:
Steeda did the install of my cams...the 33hp and 13tq that was gained was after a superchips tuning. The lope of the car is a mild lope but you can definitely tell there is a cam in the car...I get numerous people that come up and compliment on the sound of the cams. Before the cams I had a Steeda CAI, Accufab TB and Plenum, Steeda Intake Spacer, Steeda T/A, Steeda Underdrive Pulleys, Bassani O/R Xpipe, Steeda SS Cat Back, 3:73 and Steeda's N/A computer flash.

How hard is cam install?

StLStangGT

New Member

Rocketman

New Member

BLKsteeda

New Member

JonJon

Bill9000

Member

jbrown

New Member

Ruckus46Gt

Member

BLKsteeda

New Member

Defleshed

Satanic Mechanic

JonJon

Darkhorse845

Banned

Similar threads

How hard is cam install?

New Member

New Member

New Member

Member

New Member

Member

New Member

Satanic Mechanic

Banned

Similar threads

Privacy & Transparency

Privacy & Transparency