How to tell Gt40 vs Gt40p heads on explorer

[Mustang5L5]

Learned something new. I know the 94/95 GT’s and Cobras have the OBD-II ports just didn’t know they were not used.

Only the V6 went OBD2 in 1994. Since they shared some common wiring harnesses, the OBD port is installed on all 94+ SN95's

 

[AeroCoupe]

Read up on it a little last night. Makes sense with not wanting to make a second dash harness...wish they would have been in the same mindset with all of the different harnesses in the 87-93 cars (beating a dead horse).

 

[Farmstad]

@AeroCoupe are these the right 24lb injectors? It was from a 89 460 big block. Does it have to be the 92 and up for the model year?

 

[Mustang5L5]

Yup, those are 24s

 

[AeroCoupe]

The blue top indicates they are 24 lb/hr units and the connectors are EV1’s. The list I posted was just what I could find and not necessarily all inclusive.

How much do they want for them?

 

[Farmstad]

Haven’t asked yet but probably not too much since the only changed me $88 can for cylinders heads with valve covers included. So probably will be worth picking up you think?

 

[Farmstad]

Hopefully they work good if I get them

 

[AeroCoupe]

So this is must me but with used injectors you should probably have them serviced. This would be someone like Injector Doctor or the likes. Call around and see if anyone does it somewhat local to you and see what the cost is. I only say this as if these have sat static for a while then who knows how they will function.

If you choose to use them as is then at least get new o-rings, filters, and pintal caps for them.

Fuel Injector Rebuild Kit | Ford Mustang 5.0L 302 1986-1995

Injector Shop Fuel Injector Rebuild - Repair - Service Kit Fitment:Ford Mustang 5.0L 1986-1995Bosch EV1 Top Feed Fuel Injector Parts included in kit: 8 Micro Filter Baskets 8 Premium Upper Fuel Rail Viton O-rings 8 Lower Spacers 8 Premium Lower Intake Viton O-Rings 8 Pintle Cap Protectors...

theinjectorshop.com

 

[Farmstad]

Right cleaning then and especially getting new o ring will be a good idea. If I get them I will probably buy that rebuild kit.