• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

How would this setup be with speed density?

  • Thread starter Thread starter Rick's Fords
  • Start date Start date Jul 5, 2007
R

Rick's Fords

New Member
Dec 25, 2004
95
0
0
Jul 5, 2007
#1
  • Jul 5, 2007
  • #1
The car currently has the following:

3.73's
K+N Big Cone
BBK Shorty Unequals
Offroad H w/ High Flow Cats
Dual Chamber Flowmasters
Underdrive Pullys


I was thinking of picking up a 70MM TB kit from BBK for $180, and a Trickflow intake. Also wanting to put on some GT40 heads.

Couple of friends want me to turbo the motor, but I'm only looking for 300-350 HP, pretty much my daily driver right now.

My question is, I've seen/heard some comments about changing the airflow on a speed density setup being bad. Do I need to convert it to MAF in order for this setup to be beneficial? Also, anyone know any rough numbers this setup would pull on a dyno?

Thanks for your time.
 

cenok is family

15 Year Member
Jun 25, 2003
1,409
69
79
Norman, Ok
Jul 5, 2007
#2
  • Jul 5, 2007
  • #2
you can either run mass air or you can take it somewhere and have the SD ecu reprogrammed. there are some people on here that have changed the induction on their cars and are still running SD, i'm sure they'll chime in. even with whats on the car already, the gt40's, the trickflow intake and the bbk throttle body you won't be at 300rwhp. it'll definitely waken up your car though. i say go for it!
 
R

Rick's Fords

New Member
Dec 25, 2004
95
0
0
Jul 8, 2007
#3
  • Jul 8, 2007
  • #3
Thanks for the post, anyone else?
 

gt40_2003wes

I did sound a wee bit gay there.
Aug 14, 2005
461
2
48
ky
Jul 8, 2007
#4
  • Jul 8, 2007
  • #4
with tht setup it should be sd friendly maybe the trick flow intake might mess wit it some but not much speed density starts having alot of problems when u go with a cam along with ur setup. but even then u can get a tweecer burnt to take care of tht but in the end if ur looking for later on down the road when u may actually go big then go ahead and convrt to mass air its relitively cheap and saves u alot of but hurt in the long run.
 

87foxstang

Member
May 10, 2007
0
0
16
Cromwell, CT
Jul 8, 2007
#5
  • Jul 8, 2007
  • #5
guess ill chime in..As in my sig i have quite a bit of mods... for SD anyway and no problems for me, but im guessing if you went through with the whole TF package you would have to get a new chip burnt or something
 
You must log in or register to reply here.

Similar threads

S
Requesting Guidance for 306 motor swap - Fuel? - SD? MAF?
  • So_Flo
  • Jul 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 4, 2026
Mcmahst
SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
15
Views
7K
1994 - 1995 Specific Tech Jun 28, 2026
GearHeadGuy
Which one of these 3 intakes make the most sense for my 331 combo
  • from6to8
  • Jul 25, 2024
  • 1994 - 1995 Specific Tech
Replies
7
Views
2K
1994 - 1995 Specific Tech Jul 26, 2024
AeroCoupe
F
1993 Cobra flooding
  • FireFoxCobra_SVT93
  • May 20, 2022
  • Fox 5.0 Mustang Tech
  • 2
Replies
20
Views
6K
Fox 5.0 Mustang Tech Mar 11, 2023
nickyb
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?