World Winsdsor iron Jr heads, stud 1.6 roller rockers, mass air conversion, 75mm maf meter, 24lb. injectors, mac fenderwell intake, gt40 or cobra intake with 65mm tb, billet flywheel, valeo clutch, Lunati flat tappet cam (230/230 dur...512/.512 lift 2,200-6,000 rpm, hydrauilc lifters, Pete Jackson timing gears, speed pro forged pistons, cut crank, rods, new 10/10 bearings, oil pump etc. and the stuff in my sig. Will i need a chip or anything for the 75mm maf meter to work with the new 24lb injectors? Do i need a special balancer to work with the billet flywheel? Should i go with Cobra or GT40 intake? Thanks for any opinions