HUGE DENT IN OIL PAN!!!! PICS INSIDE

mustangfan1990

New Member

Jul 17, 2005

505

1

0

Lenoir, North Carolina

Jun 6, 2008

#1

• Jun 6, 2008

• #1

Ok I got to looking under the car to check for any visual damage from the Harmonic Balancer/ SC crank pulley breaking and falling from the car. The reason I thought there might be some damage is because when this happened somewhere the HB got wedged in the front of the car and lifted the front of the car off the ground for a split second( or it seemed like it did) so I noticed a ticking sound (like an exhaust leak) when I was driving the car home. I put the Stock crank pulley ( NO S/C) to atleast drive the car home. The car drove good and seemed like there was nothing wrong. Sounded the same and ran good considering the car was running with no SC but I did not drive the car hard because the car is tuned to run with the SC...anyway I got to looking in the front of the car and there is this HUGE dent in the front of the oil pan where the drain plug is. Now my question is will this hurt anything leaving it this way until I can get another oil pan some time down the road when I pull the motor ( not telling WHY I am pulling the motor hehe)? Here are some pics that I just took a few minutes ago of the dent

 

Foxfan88

My Grandpa has great wood.

Sep 13, 2004

2,487

4

0

Miami, Ok

Jun 6, 2008

#2

• Jun 6, 2008

• #2

wont hurt anything

 

enyawix

Member

Dec 18, 2005

507

0

19

127.0.0.1

Jun 6, 2008

#3

• Jun 6, 2008

• #3

Looks like a rock came up off the road.

 

B

btsclan

Member

Feb 22, 2004

64

0

6

Seattle, WA

Jun 6, 2008

#4

• Jun 6, 2008

• #4

Its hard to say, the dent doesnt look that deep so I dont think it would interfere with anything on the bottom side of you engine, also I belive the oil pump tube is located further back so that shouldnt be effected either.

 

mustangfan1990

New Member

Jul 17, 2005

505

1

0

Lenoir, North Carolina

Jun 6, 2008

#5

• Jun 6, 2008

• #5

enyawix said:

Looks like a rock came up off the road.

Click to expand...

nah that is where the HB hit the oil pan when it fell off and I was driving down the road. For anyone that wants a supercharger be prepared if you engine isnt ready for it it will let you know..

 

enyawix

Member

Dec 18, 2005

507

0

19

127.0.0.1

Jun 6, 2008

#6

• Jun 6, 2008

• #6

mustangfan1990 said:

nah that is where the HB hit the oil pan when it fell off and I was driving down the road. For anyone that wants a supercharger be prepared if you engine isnt ready for it it will let you know..

Click to expand...

? you lost me. please make this more clear.

 

mustangfan1990

New Member

Jul 17, 2005

505

1

0

Lenoir, North Carolina

Jun 6, 2008

#7

• Jun 6, 2008

• #7

enyawix said:

? you lost me. please make this more clear.

Click to expand...

The harmonic balancer snapped off the car last week when I was driving home from work. The HB and the SC crank pulley fell and hit the ground and got wedged between the oil pan and the road there fore leaving the dent in my oil pan

 

8

87AODGT

Founding Member

Jan 6, 2001

373

1

19

Toms River, NJ

Jun 6, 2008

#8

• Jun 6, 2008

• #8

you should be fine, not like any of the rods swing down that low to make contact with the pan anyway

 

Maryland Stang

Active Member

Aug 21, 2002

1,656

30

39

Greenville, NC

Jun 7, 2008

#9

• Jun 7, 2008

• #9

enyawix said:

? you lost me. please make this more clear.

Click to expand...

What he's trying to say is the factory HB is junk. I've seen them break the crank snout off of non SC cars before.

 

ShortThrow50

Member

Oct 22, 2006

923

2

16

Pa

Jun 7, 2008

#10

• Jun 7, 2008

• #10

it doesnt look loike that oil return is close enough to the top of the pan

 

mustangfan1990

New Member

Jul 17, 2005

505

1

0

Lenoir, North Carolina

Jun 7, 2008

#11

• Jun 7, 2008

• #11

well that probably because of the silicone that i used around the barb to make sure that it didnt leak. I am pretty sure that it is high enough cause i poked that hole in the oil pan with 5 quarts of oil in it and the motor hadnt been ran in a week so all the oil was in the oil pan and also I went be the directions that came with the SC on the measurements on where to put it. If it was wrong wouldnt I know it by now? maybe not

 

mustangfan1990

New Member

Jul 17, 2005

505

1

0

Lenoir, North Carolina

Jun 7, 2008

#12

• Jun 7, 2008

• #12

View attachment 315329

A little small dont think you can really see it that good

 

5spd GT

"the 5.0 owns all"

Founding Member

Aug 7, 2002

9,516

6

99

Arkansas

Jun 7, 2008

#13

• Jun 7, 2008

• #13

That is not going to cause any issues. The oil pick-up area on the pick-up tube is on the other end of the oil pan, towards the rear.

 

mustangfan1990

New Member

Jul 17, 2005

505

1

0

Lenoir, North Carolina

Jun 7, 2008

#14

• Jun 7, 2008

• #14

5spd GT said:

That is not going to cause any issues. The oil pick-up area on the pick-up tube is on the other end of the oil pan, towards the rear.

Click to expand...

yeah I knew that I was just wanting conformation that there wasnt any harm there. I knew that the oil pump is right next to that though. Would suck if it hit that and bent that tube or caused it to leak and lose oil pressure. I am having a hard time keeping oil in this thing as it is since i started running synthetic

 

93 LX

Founding Member

Jun 2, 2000

3,081

3

0

Norwalk, CA.

Jun 7, 2008

#15

• Jun 7, 2008

• #15

I was looking at how close the dent is to the plug. You may want to on the next oil change run a bolt up there and see if it hits the dent. If it does you may need to use the bolt to help move the dent downward to give clearence incase it will not allow the drain plug to seat.

 

mustangfan1990

New Member

Jul 17, 2005

505

1

0

Lenoir, North Carolina

Jun 7, 2008

#16

• Jun 7, 2008

• #16

93 LX said:

I was looking at how close the dent is to the plug. You may want to on the next oil change run a bolt up there and see if it hits the dent. If it does you may need to use the bolt to help move the dent downward to give clearence incase it will not allow the drain plug to seat.

Click to expand...

Good advice...If I had the money I would buy a canton 7 quart pan and slap my 347 in my money is tight right now with me in the process of buying a house

 

ShortThrow50

Member

Oct 22, 2006

923

2

16

Pa

Jun 8, 2008

#17

• Jun 8, 2008

• #17

mustangfan1990 said:

View attachment 315236

A little small dont think you can really see it that good

Click to expand...

it looks fine in that pic. pictures can look f...ed up sometimes

 

93 LX

Founding Member

Jun 2, 2000

3,081

3

0

Norwalk, CA.

Jun 8, 2008

#18

• Jun 8, 2008

• #18

good time to buy a house now home prices are coming down.

 

mustangfan1990

New Member

Jul 17, 2005

505

1

0

Lenoir, North Carolina

Jun 8, 2008

#19

• Jun 8, 2008

• #19

93 LX said:

good time to buy a house now home prices are coming down.

Click to expand...

OHHH YEAH thats why I am doing it now. I am getting a STEAL for a 2000 sqft house and 1.25 acres of land. now listing the price though but lets say I could resale it and make double what i paid. The house and all is BRAND new

 

Maryland Stang

Active Member

Aug 21, 2002

1,656

30

39

Greenville, NC

Jun 10, 2008

#20

• Jun 10, 2008

• #20

93 LX said:

good time to buy a house now home prices are coming down.

Click to expand...

Buying a house now is like trying to catch a falling knife. You may get it right and catch the knife or you may get it wrong and bleed like a stuck pig.

Don't buy when they're coming down, buy when they're just starting to go up.

The only "experts" saying that prices have bottomed out are those that work for the NAR. ALL other data points otherwise. Sales of existing homes continue to be very sluggish with a whole lot of homes sitting for a very long time due to the homeowners not believing that the prices are not the same now as they were 2,3 and 4 years ago.