Throttle only opens like say 3/4 of the way so thanks for your suggestion.
Great thanks i will do that
The gas pedals are known to bend the metal is bent on a U shape. It should be parallel through the bends. If it bends it'll put the peddle closer to the floor.
That probably isn't your loss of driving hp. It'll only affect wide open throttle.
Verify your timing and make sure you don't have any vacuum leaks. Make sure all the pins in all the connectors are tight. I've seen wires slide back in the connector. It looks plugged up but the wires aren't making contact.
Great thanks i will do thatThe gas pedals are known to bend the metal is bent on a U shape. It should be parallel through the bends. If it bends it'll put the peddle closer to the floor.
That probably isn't your loss of driving hp. It'll only affect wide open throttle.
Verify your timing and make sure you don't have any vacuum leaks. Make sure all the pins in all the connectors are tight. I've seen wires slide back in the connector. It looks plugged up but the wires aren't making contact.
Great thanks I will start with the TB to get it wide open and full pedal.Check the wires and the connector where the passenger kick panel should be.
I agree with @90sickfox about it affecting full power. I assume that’s where people test power.If the problem wasworse, it would not have the expected part throttle. Might as well fix it.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?