I need a little help

Ok guys, I found and fixed the problem. The governor is the relay. It is a module located on the backside of the incar fuse panel. It is a module with relays built in. it controls every function on the control switch fot the wipers, fluid, signals, etc. I found it,opened it up(has pinch tabs) and discovered that there were a few connection broken/burnt out. Soldered a small peiece of test wire and tad da! It worked again. So I replaced the unit. It is called a interval governor, multi func relay, wiper control relay module, etc. thanks everybody for info and help. Hope all this info may help someone else in the future.