• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

I need drag racing help

  • Thread starter Thread starter demononwheels
  • Start date Start date Jul 28, 2006

demononwheels

New Member
Jul 1, 2006
10
0
1
Texas
Jul 28, 2006
#1
  • Jul 28, 2006
  • #1
I have a 1993 lx vortech s-trim, 306 making 508 rwhp. I'll be having my first race with this new motor and still rusty on my launching of the line.
Seems like I'm having supercharger lag. Any tips on what rpms to launch at.
Tire pressure? I have MT ET STREETS.
Need some tips.
Thanks
 

90mustangGT

I felt sorry for girls because
Founding Member
Jan 15, 2002
2,773
17
89
Dallas, GA
Jul 28, 2006
#2
  • Jul 28, 2006
  • #2
I would start low, and bring the rpm up each pass until you find the right spot.
 

NKau

Founding Member
Dec 15, 2001
1,346
0
37
Jefferson, WI
Jul 28, 2006
#3
  • Jul 28, 2006
  • #3
90mustangGT said:
I would start low, and bring the rpm up each pass until you find the right spot.
Click to expand...

Bascially.

Assuming you are running at a track where you can get a good 6+ runs in a night, just start out at 2-3K rpm slipping/dumping the clutch off the line, and move up in rpm until you are having traction issues out of the hole. With ET streets and assuming your rearend/suspension is set up right, I'd figure you should be able to cut some 1.9/2.0 sec 60 ft. times your first time out. Practice makes perfect.

You want to run through first gear with as little tire spin as possible, but always sacrifice slight tire spin for bogging.
 

demononwheels

New Member
Jul 1, 2006
10
0
1
Texas
Jul 28, 2006
#4
  • Jul 28, 2006
  • #4
Thanks. I'll try that.
 

onefstsnake

New Member
Nov 25, 2005
792
1
0
Northern VA
Jul 28, 2006
#5
  • Jul 28, 2006
  • #5
first run I would just slip it a bit. then punch it and see if it holds.

your going to need 3k or more to dump the clutch...
and dont touch the air pressure till you get a few runs in.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jul 30, 2006
#6
  • Jul 30, 2006
  • #6
try launching in 500 rpm incriments. if you spin off the line constantly then lower the air pressure in your tires. i run mt drags and i run 10 psi in them. I don't make 506 ponies however. if you run lower psi be carefull how you come off the gas pedal at the end of the track. if you come off fast and you are not used to the feel of the tires it can make for a little bit of a scare.
 
You must log in or register to reply here.

Similar threads

Need some camshaft guru advice on power loss from supercharger to nitrous
  • TTSaleen
  • Dec 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
987
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 29, 2025
revhead347
T
New here, just saying hi.
  • Tank Mechanic
  • Nov 1, 2025
  • The Welcome Wagon
Replies
2
Views
233
The Welcome Wagon Nov 2, 2025
nickyb
5
Hello Everyone !
  • 5150K
  • Jul 3, 2026
  • The Welcome Wagon
Replies
0
Views
189
The Welcome Wagon Jul 3, 2026
5150K
5
A
SOLD For Sale: 1993 Ford Mustang Cobra Modified
  • anjteal93
  • Sep 5, 2025
  • Fox Body Mustangs For Sale (1979-93)
Replies
13
Views
2K
Fox Body Mustangs For Sale (1979-93) Oct 26, 2025
Mindseye007
SOLD For Sale '92 LX Street/Drag car - WV
  • MikeyMustang
  • Apr 12, 2025
  • Fox Body Mustangs For Sale (1979-93)
Replies
4
Views
2K
Fox Body Mustangs For Sale (1979-93) Dec 31, 2025
MikeyMustang
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?