of a stock 302 bottom, b cam, gtp's and a typhoon intake with all the bolt ons, Ive been lookin just cant find it, or if someone has numbers of thier own that would work as well...
Could you email me your setup, what did you do to the stock heads (port, polish, valve size, compression) and did you degree your cam any baseline numbers before the heads....thats amazing jason129@bellsouth.net
Stock bottom end (honed and file fit rings), Stock cam, E7s with GT40 valves, valve job, but no porting, 1.7 rockers, Cobra intake, 65mm TB, 75mm MAF, CAI, pulleys, Long Tubes, Prochamber and a Catback.
Made 265/308 with a bone stock bottom end (100,000+ miles).
This season made 256/295 with the same honed motor and a different midpipe and mufflers.
Stock bottom end (honed and file fit rings), Stock cam, E7s with GT40 valves, valve job, but no porting, 1.7 rockers, Cobra intake, 65mm TB, 75mm MAF, CAI, pulleys, Long Tubes, Prochamber and a Catback.
Made 265/308 with a bone stock bottom end (100,000+ miles).
This season made 256/295 with the same honed motor and a different midpipe and mufflers
yes yes I know!! B cam!!! no stocker, its what my engine is set up with, not a combo im putting together, just curious of the torque curve, so i can decide on gears...