• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

I smell gas.

  • Thread starter Thread starter dec322
  • Start date Start date Feb 15, 2006
D

dec322

Member
Feb 11, 2006
401
2
16
Bham AL
Feb 15, 2006
#1
  • Feb 15, 2006
  • #1
I just bought the car Saturday and have filled it up twice (long trip to get it). Some gas overflowed out of the tank and I could smell gas as a result. But over the past couple of days I've noticed the smell inside my car and also under the hood. I don't think its running rich b/c I haven't seen any smoke. All the plugs, wires, and cap are new. The fuel injectors were just serviced before I bought the car. Is there a common problem on these cars?

Today after work, I'm going to buy something to pull codes. We'll see if that turns up anything (this is also the beginning of my quest to solve the surging idle )
 
S

ss93cobra

Founding Member
Apr 10, 2002
1,422
1
0
Wilmington NC
Feb 15, 2006
#2
  • Feb 15, 2006
  • #2
A few things come to mind. Either the vapor management system isn't working correctly, or the drain tube is clogged. On top of the fuel tank is a plastic vent valve that recirculates fuel vapors. If it is broken or not functioning correctly, you'll smell fuel. If the drain tube for the filler pipe is plugged up, fuel will pool in it and could cause a fuel smell. Or you have no tailpipes on the car and the exhaust is being sucked up into the passenger compartment. Or the car is simply running extremely rich.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Feb 15, 2006
#3
  • Feb 15, 2006
  • #3
Here's the link to dump the computer codes with only a jumper wire or paper clip and the check engine light, or test light or voltmeter. I’ve used it for years, and it works great.

See http://www.troublecodes.net/Ford/
OR
See http://www.mustangworks.com/articles/electronics/eec-iv_codes.html

IF your car is an 86-88 stang, you'll have to use the test lamp or voltmeter method. There is no functional check engine light on the 86-88's except possibly the Cali Mass Air cars.

Codes have different answers if the engine is running from the answers that it has when the engine isn't running. It helps a lot to know if you had the engine running when you ran the test.

Trouble codes are either 2 digit or 3 digit, there are no cars that use both 2 digit codes and 3 digit codes.

For those who are intimidated by all the wires & connections, see http://www.actron.com/product_detail.php?pid=16153 for what a typical hand scanner looks like. Normal retail price is about $30 or so at AutoZone or Walmart.

Or for a nicer scanner see http://www.midwayautosupply.com/detailedproductdescription.asp?3829 – It has a 3 digit LCD display so that you don’t have to count flashes or beeps.. Cost is $35.
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Feb 15, 2006
#4
  • Feb 15, 2006
  • #4
dec322 said:
I just bought the car Saturday and have filled it up twice (long trip to get it). Some gas overflowed out of the tank and I could smell gas as a result. But over the past couple of days I've noticed the smell inside my car and also under the hood. I don't think its running rich b/c I haven't seen any smoke. All the plugs, wires, and cap are new. The fuel injectors were just serviced before I bought the car. Is there a common problem on these cars?

Today after work, I'm going to buy something to pull codes. We'll see if that turns up anything (this is also the beginning of my quest to solve the surging idle )
Click to expand...

Since u said fill up, the rubber oring/gasket that is supposed to seal the filler tube on the side of the tank comes to mind. That might be bad. Try and see where its leaking from
 

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Feb 15, 2006
#5
  • Feb 15, 2006
  • #5
maybe the rubber gasket that goes on the fuel pump is not sealing...this happend in my buddys 02 gt when we switched a 255 pump in
 

RsStanG1987

I shaved all my pubes playing this game.
10 Year Member
Mar 13, 2004
569
9
79
Dupont PA
Feb 15, 2006
#6
  • Feb 15, 2006
  • #6
87stangdiddle said:
Since u said fill up, the rubber oring/gasket that is supposed to seal the filler tube on the side of the tank comes to mind. That might be bad. Try and see where its leaking from
Click to expand...
exactly what i was thinking my car does the same thing...
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Feb 15, 2006
#7
  • Feb 15, 2006
  • #7
Another vote for the EVAP system.

The Charcoal Cannister on a fox is up front to the pass side of the radiator. The hoses like to vulcanize at the CC and also the main line from the solenoid to the intake goes south where it sits under the plenum. If you need a replacement hose, note that some of them have two different I.D.'s at each end. Jrichker has posted some wise info about fire danger which should be heeded if considering splicing lines together to make your own hoses.

Good luck.
 

Blk91stang

Member
Jan 3, 2003
607
0
16
North Brunswick, NJ
Feb 15, 2006
#8
  • Feb 15, 2006
  • #8
RsStanG1987 said:
exactly what i was thinking my car does the same thing...
Click to expand...

My gf's 94 GT did the same thing. Used some rtv to seal it back up. No more gas smell..
 

TrunkFunk

Banned
Dec 28, 2005
83
0
0
A1A - Beach Front Avenue ...
Feb 15, 2006
#9
  • Feb 15, 2006
  • #9
You smell 'gas'
 

Slo 5.0

Member
Apr 6, 2005
144
0
16
St. Louis
Feb 15, 2006
#10
  • Feb 15, 2006
  • #10
maybe your fuel rail broke.... like mine.
 

wht93gtEd

Active Member
Nov 11, 2004
0
9
29
Jersey Shore, New Jersey
Feb 15, 2006
#11
  • Feb 15, 2006
  • #11
HAHAHAHAHA!!!!

I was looking through the topics real quick, like I always do, and I looked too fast. I thought the title was, "I smell a$$"...

here's what I saw:


My brain kinda squished it all together into 1 funny sentance...yup...that's how I think... *sigh
 

sportinawoody

New Member
Feb 8, 2006
20
0
1
Feb 16, 2006
#12
  • Feb 16, 2006
  • #12
fuel injector o rings. if fixed tons of 5.00000's with this problem. look at each injector to see any signs of dampness. either o ring or fuel injector itself most likely.
 
D

dec322

Member
Feb 11, 2006
401
2
16
Bham AL
Feb 16, 2006
#13
  • Feb 16, 2006
  • #13
Yeah, I know somethings up when I fill up. I'm not sure where it comes from but I falls to the ground. I can fix that easy enough (whenever I get time). I'll check the canister this weekend and also the o-rings. I had a bonneville that had the same smell and it was an o-ring problem. I just need some time to actually look into this stuff.
 
D

dec322

Member
Feb 11, 2006
401
2
16
Bham AL
Feb 18, 2006
#14
  • Feb 18, 2006
  • #14
I look at the injectors yesterday and I could definitely see some dampness. I'll have to take the intake off in order to look at each one closer.

The messed up thing is that the guy I bought this car from said he just had all the injectors serviced (new orings and such).
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Feb 18, 2006
#15
  • Feb 18, 2006
  • #15
You are one of the many 87-89 Mustang owners that has leaky injectors. The 87-89 cars had injectors that developed leaks around the top of th injector at the joint between the plastic and the metal. There is nothing you can do to repair the leak at this joint. You get to replace the injectors. I replaced all 8 of mine over time, and did the injector seals along with them.

Fuel injector seal kits with 2 O rings and a pintle cap (Borg-Warner P/N 274081) are available at Pep Boys auto parts. Cost is about $2.74 per kit.. The following are listed at the Borg-Warner site ( http://www.borg-warner.com ) as being resellers of Borg-Warner parts:

http://www.partsplus.com/ or http://www.autovalue.com/ or http://www.pepboys.com/ or http://www.federatedautoparts.com/

Most of the links above have store locators for find a store in your area.

Use motor oil on the O rings when you re-assemble them & everything will slide into place. The gasoline will wash away any excess oil that gets in the wrong places and it will burn up in the combustion chamber.

The pintle caps fit either injectors with a pin sticking out the injector end or 4 with more tiny holes in the injector end
 
D

dec322

Member
Feb 11, 2006
401
2
16
Bham AL
Feb 18, 2006
#16
  • Feb 18, 2006
  • #16
jrichker said:
You get to replace the injectors. I replaced all 8 of mine over time, and did the injector seals along with them.

Fuel injector seal kits with 2 O rings and a pintle cap (Borg-Warner P/N 274081) are available at Pep Boys auto parts. Cost is about $2.74 per kit.. The following are listed at the Borg-Warner site ( http://www.borg-warner.com ) as being resellers of Borg-Warner parts:
Click to expand...

Thanks. That borg-warner site didn't work? Maybe its just my computer acting up.

So I need to replace the injectors and buy a seal kit for each injector? Common sense would put them together but I guess "the man" will get more money if the injectors and seal kit are sold seperately.

Does anyone support a specific brand of injector? All I need is the stock 19# injectors.
 
You must log in or register to reply here.

Similar threads

2
Running very very rich
  • 2esoteric
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
469
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
Engine Gas in my oil
  • limp
  • Jun 15, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
35
Views
2K
Fox 5.0 Mustang Tech May 16, 2026
Mindseye007
A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
599
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
8
Engine Rough idle and aggressive sputtering when accelerating
  • 88vertible
  • Aug 13, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Dec 13, 2025
Jarhead67
J
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
1K
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?