I think something is seriously wrong with my car (timing related)

1

1hot5.0

Founding Member

Sep 6, 2002

1,615

0

0

Surprise, Arizona

Nov 27, 2004

#1

• Nov 27, 2004

• #1

I wanted to check my timing yesterday. I pulled the spout and go to start the car, and it wouldn't start! I put the spout in and bam it fires right up. With the car running, I pulled the spout out and the car died.

What could cause this problem? I've adjusted my timing many times on a '91 LX I had and never had one issue.

Thanks in advance for any help.

 

mytight95

Active Member

Apr 11, 2003

2,605

0

46

Dothan,Al

Nov 27, 2004

#2

• Nov 27, 2004

• #2

mine will run with the spout out, maybe it is set way too low, so that when you pull the spout and the computer isn't advancing it anymore the timing is too far reatarded to run. Other than that.......maybe a good tune up etc.


jason

 

1

1hot5.0

Founding Member

Sep 6, 2002

1,615

0

0

Surprise, Arizona

Nov 27, 2004

#3

• Nov 27, 2004

• #3

mytight95 said:

mine will run with the spout out, maybe it is set way too low, so that when you pull the spout and the computer isn't advancing it anymore the timing is too far reatarded to run. Other than that.......maybe a good tune up etc.


jason

Click to expand...

Thank you for your input... That is what a friend of mine suggested also. The car was recently tuned up (plugs, cap, rotor, wires, fuel filter), so I don't think it's that.

I guess the only way to fix it is to bump the motor to top dead center, put the distributor at 12 o'clock and start from scratch?

 

mytight95

Active Member

Apr 11, 2003

2,605

0

46

Dothan,Al

Nov 27, 2004

#4

• Nov 27, 2004

• #4

or advance the distrubutor while the spout is in........then remover the spout and set the timing to the desired number


jason

 

1

1hot5.0

Founding Member

Sep 6, 2002

1,615

0

0

Surprise, Arizona

Nov 28, 2004

#5

• Nov 28, 2004

• #5

Thanks for your reply. It is still doing it. I'm guessing maybe a wire for the spout is grounding out somewhere to the body when the connector is pulled? Oh well, it's nothing too major. The car runs great.

 

WhiteDevil

New Member

Feb 4, 2003

2,717

0

0

San Diego

Nov 28, 2004

#6

• Nov 28, 2004

• #6

Do you have a timing light? Its pretty hard to adjust timing without that. I would do exactly what mytight95 says. If my car is running and i pull the spout it barely changes the idle at all.