Fox Identify These Cc Plates

[No.11]

Hey guys, picked these up yesterday for $65, seller was unsure of the brand. After looking around the net, they seem to look like Hotchkis 3001 plates. If anyone happens to have 3001s and knows what markings they're supposed to have or knows what plates they are, let me know por favor.

They don't have any part numbers or markings of any kind other than sv and 8.8 or sfc and 8.8 on the bolt heads.

Since all I have is what's pictured, I guess I'll need to source a few other pieces of hardware and the strut boot, correct?

Hopefully they're a fit for my 91. Thanks!

 

[a91what]

Look like bbk knock offs....

Used with stock spring and shock setup. Not for coilovers

 

[Bullitt347]

Bushings are shot. Throw everything in the trash and buy new ones. It is the American way!

 

[revhead347]

The look serviceable, but not great. Bushings are a little tore up. Worth a try.

Kurt

 

[No.11]

Maybe I should resell and get some MM.

 

[mikestang63]

cheap no name aluminum knock offs with shot bushings. You paid too much for them
I would sell them and get a set of MM ones and be done with it.

 

[FastDriver]

Run 'em! LOL

 

[Boostedpimp]

if your not running coilovers just replace the bushings and send it

 

[No.11]

if your not running coilovers just replace the bushings and send it

Where might I be able to get just the bushings?

 

[Boostedpimp]

They look like BBK's or knock off BBK's so give cjpony parts a call they sell bushings for the bbk's

https://www.cjponyparts.com/bbk-caster-camber-plate-replacement-bushing-kit-1979-2004/p/HW3141/

 

[No.11]

They look like BBK's or knock off BBK's so give cjpony parts a call they sell bushings for the bbk's

https://www.cjponyparts.com/bbk-caster-camber-plate-replacement-bushing-kit-1979-2004/p/HW3141/

Awesome! Found them a little cheaper at Americanmuscle. That'd make it $78 total with new bushings. Not bad. Still... Can't beat MM for fitment and quality, and ability to use with coilovers.