• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

idle prolbem. already searched

  • Thread starter Thread starter notsoswwuyd
  • Start date Start date Dec 23, 2004
N

notsoswwuyd

New Member
Dec 13, 2004
21
0
0
Wichita Falls Texas
Dec 23, 2004
#1
  • Dec 23, 2004
  • #1
I have read the past posts and cannot find the answer. the past posts talk about the iac, tbs, collant tems sensor, timing and base idle. the tbs, iac ant the coolant temp sensor have been replaced, along with the base idle and the timing being adjusted. the car still dies when I start it after it has sat for around 5 hours. If it sits for anyamout of time after that it will not die and stay running. I think that the "memory" in the computer is being deleted after some time, but it is not my battiery because my radio always has the same setting and the car cranks with no prolbems. also anyone got any ideas or thoughts on how to fix my idle prolbem?


Also, what shoud my idle speed be set at? I did the idle like this article says.(http://www.muscularmustangs.com/idlereset.html)
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Dec 23, 2004
#2
  • Dec 23, 2004
  • #2
Dump the codes and see what the computer says is wrong…

Here's the link to dump the computer codes with only a jumper wire or paper clip and the check engine light, or test light or voltmeter. I’ve used it for years, and it works great.

See http://www.troublecodes.net/Ford/
OR
See http://www.dalidesign.com/hbook/eectest.html for more descriptive help
OR
See http://www.mustangworks.com/articles/electronics/eec-iv_codes.html

IF your car is an 86-88 stang, you'll have to use the test lamp or voltmeter method. There is no functional check engine light on the 86-88's except possibly the Cali Mass Air cars.

Codes have different answers if the engine is running from the answers that it has when the engine isn't running. It helps a lot to know if you had the engine running when you ran the test.

Trouble codes are either 2 digit or 3 digit, there are no cars that use both 2 digit codes and 3 digit codes.

For those who are intimidated by all the wires & connections, see http://www.actron.com/product_detail.php?pid=16153 for what a typical hand scanner looks like. Normal retail price is about $30 or so at AutoZone or Walmart.
 
M

matm347

Founding Member
Aug 29, 2000
2,056
0
0
Dec 23, 2004
#3
  • Dec 23, 2004
  • #3
What mods do you have?
 

5.0 Nostalgia

10 Year Member
Feb 28, 2003
904
5
39
CT
Dec 23, 2004
#4
  • Dec 23, 2004
  • #4
I don't get this. I know me and many others have had problems with their car stalling after the first start of the day. Your issue is not the same?
 

DMAN302

My mom says thanks for the pearl necklace.
Nov 8, 2003
2,120
2
59
windsor, Canada
Dec 23, 2004
#5
  • Dec 23, 2004
  • #5
Vac leaks can cause all types of idle problems, and can be a real pain in the A** to find..I suggest pull codes first, then check EVERY vac line. I found mine after about 20x it was in the passenger fender by the shock tower, after that she idled like a champ...even with the H/C/I.
 
N

notsoswwuyd

New Member
Dec 13, 2004
21
0
0
Wichita Falls Texas
Dec 23, 2004
#6
  • Dec 23, 2004
  • #6
no mods to the engine yet. I want to fix what is wrong befor I start modding. I have shot b12 all over the entire engine and found no vac leaks. I will try the code tomorrow, or maybe later today if I feel like it. also how do I know what 2 flashes then 3 flashes then 2 flashes means? would it be a code 232?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
33
129
Dec 23, 2004
#7
  • Dec 23, 2004
  • #7
notsoswwuyd said:
no mods to the engine yet. I want to fix what is wrong befor I start modding. I have shot b12 all over the entire engine and found no vac leaks. I will try the code tomorrow, or maybe later today if I feel like it. also how do I know what 2 flashes then 3 flashes then 2 flashes means? would it be a code 232?
Click to expand...
i think JR's links will provide you with the necessary info. pay attention to all codes, esp EGR codes, ACT and ECT codes.

foxes use 2 digit codes; SN's 3 digit codes.

good luck.
 
You must log in or register to reply here.

Similar threads

7
Engine Random hanging idle
  • 706 Saleen
  • Feb 11, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
604
Fox 5.0 Mustang Tech Feb 19, 2026
86HO5.0
8
K
Resolved Need some assistance. Holley Terminator X alongside H/C/I. Very rough/inconsistent idle
  • karhoot
  • Jun 6, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
81
Fox 5.0 Mustang Tech Jun 6, 2026
karhoot
K
8
Engine Rough idle and aggressive sputtering when accelerating
  • 88vertible
  • Aug 13, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Dec 13, 2025
Jarhead67
J
Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
2K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
H
Hanging idle issues
  • HydraX
  • Mar 22, 2025
  • SVT Tech Forum
Replies
5
Views
552
SVT Tech Forum Aug 4, 2025
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?