If Anyone Is Wondering What Clay Wants For Christmas

stykthyn · Aug 29, 2016

This makes my naughty bits tingle.
http://www.hotrod.com/articles/new-hemi-cylinder-heads-small-b-ford/

89oem · Aug 29, 2016

Thats cool !

stykthyn · Aug 29, 2016

An efi boss 351 under the hood would be the $hit

Boosted92LX · Aug 29, 2016

stykthyn said:
An efi boss 351 under the hood would be the $hit

It would be. Would you settle for this?

Noobz347 · Aug 29, 2016

Boosted92LX said:
It would be. Would you settle for this?

-2 internets for posting an image taken by someone that doesn't know how to use damned camera phone.

-6 internets for not fixing it before you posted it.

+1 internets for stumbling across an image of a liquor store named "Bunghole".

-3 internets for not waiting for a circumstance where it applied before applying it.

You owe us 10 intenerts.

RaggedGT · Aug 29, 2016

I do not like Heineken beer...

Boosted92LX · Aug 29, 2016

Noobz347 said:
-2 internets for posting an image taken by someone that doesn't know how to use damned camera phone.

-6 internets for not fixing it before you posted it.

+1 internets for stumbling across an image of a liquor store named "Bunghole".

-3 internets for not waiting for a circumstance where it applied before applying it.

You owe us 10 intenerts.

I beg to differ. It did apply. Clay likes liquor, and bunionholes. He wants cylinder heads that I can't afford. While this isn't a bunion hole liquor store, it's close. Good enough..

Give me my internets!

Noobz347 · Aug 29, 2016

Ok, you can have your 3 internets back but that's it.

mikestang63 · Aug 29, 2016

I prefer this store myself. Nice selection

v

A5literMan · Aug 29, 2016

mikestang63 said:
I prefer this store myself. Nice selection

v

Ohh I want to shop there!

Last year I was on vacation up in the great old Wisconsin north woods ...went to a convenience store in the boonies and didn't have my phone so no pics. But on the side of the store there was a sign pointing to front entrance that read "liquor" and a sign near the rear that said "fudge"...I told my brother "hey look" lick her in the front and fudge in the back...kind of forgot my 60+ year old mother was sitting in the back seat. All I hear is crickets for about 10 seconds and then she says "well at least you'll know if you're doing it wrong!" I nearly myself with laughter. My mother has NEVER said anything remotely crude or sexual in my presence before(and thank god for that). Still was one of the funniest moments of my life. Especially if you knew her. Sorry back to your thread lol

Mstng93SSP · Aug 29, 2016

I know what would happen to me if I told my wife "I'm gonna run down to beaver liquors and grab a few Heini's"......

Mustang5L5 · Aug 30, 2016

Boosted92LX said:
It would be. Would you settle for this?

I live about 2 miles from this place. First time I drove by it I did a double take.

You guys want anything from my local Bungholes?

Sent from my big ass iPhone 6 using Tapatalk

stykthyn · Aug 30, 2016

Mustang5L5 said:
I live about 2 miles from this place. First time I drove by it I did a double take.

You guys want anything from my local Bungholes?

Sent from my big ass iPhone 6 using Tapatalk

It's a small world isn't it

Davedacarpainter · Aug 30, 2016

I hate to lose track of the thread, but those heads are really nice. Now I just need a short block to put them on.

I'm thinking 400cfm might be a little much for my little 306.

Someday though, when the price isn't $5k or those lottery tickets pay off!

stykthyn · Aug 30, 2016

Davedacarpainter said:
I hate to lose track of the thread, but those heads are really nice. Now I just need a short block to put them on.

I'm thinking 400cfm might be a little much for my little 306.

Someday though, when the price isn't $5k or those lottery tickets pay off!

Fill those empty cfm's with a vortech

Gearbanger 101 · Aug 30, 2016

$5,000.....

hoopty5.0 · Aug 30, 2016

To swap those heads onto my car, it will cost more than I have invested in the entire project. I dont wanna be that cool.

Davedacarpainter · Aug 30, 2016

hoopty5.0 said:
To swap those heads onto my car, it will cost more than I have invested in the entire project. I dont wanna be that cool.

But you know you would be the coolest.

Bullitt347 · Aug 30, 2016

Shoot, I have $3k into a set of AFR Renegade 220's on my car, so anothe $2k for an extra 70 cfm? Plus the cost of pistons, rings, pushrods ect? Could probably make more power cheaper elsewhere.

CarMichael Angelo · Aug 30, 2016

5k is all it takes to have what will be a freakin amazing looking Windsor? (I'll take two sets please).

If,......If those heads see production, and if that guy can stay in business you'll see those damn things all over the place.
(in mega high dollar builds)
Question for all of you me too's:

How much will it take (from right now) to make your engine compartment look like this? $6500.00? (remember all of the stuff that has to change).......

All to have most of that mechanical goodness hidden under a piece of plastic to hide all of the ugly business.

Just think,....Those new hemi heads, with plug wires going into the valve cover is all it takes to make your current engine look like this^^
Only without the plastic.

But...........

The ad says that you can use your existing intake manifold:

AFR 205:

I'm not seein that...Maybe it's a camera angle thing but the distance from the inside head bolt to intake mating surface looks longer.

So,....maybe it's gonna require a sheet metal intake...$$$$$$$$$
Definitely gonna need Jesel rockers $$$$$
New pushrods$
Definitely gonna need new headers, to fit a Yates head...$$$$

So,....maybe 10k on top of your existing engine????

You gotta want these heads really bad.

If Anyone Is Wondering What Clay Wants For Christmas

I want to measure mine. It doesn't look that tall.

Mustang Master

I want to measure mine. It doesn't look that tall.

It's only an inch or two. What's the big deal?

Stangnet Facilities Maint Tech... Er... Janitor

Been here over a DECADE and still no CT

It's only an inch or two. What's the big deal?

Stangnet Facilities Maint Tech... Er... Janitor

At least it is lumpy...

You have a nice rear end there Dave.

That is…until I whipped out my Bissell

I want to measure mine. It doesn't look that tall.

Chicks can make things hard if they’re inspired...

I want to measure mine. It doesn't look that tall.

Straight Outta Locash

mechanicus terribilis

Chicks can make things hard if they’re inspired...

I have been doing it wrong this whole time

my rearend will smell so minty fresh,

Similar threads

Privacy & Transparency

Privacy & Transparency