if i do a SN95 swap will this wheel fit?

[1bad67sbf]

i have a set of wheels i got for my 67 a year or so ago and its looking like they may not fit so before a sell them will they fit on my 92 gt with a 94-95 sn95 conversion? they have 6in backspace. this is not my ebay add, it just happens to be the same set of wheels i got. (i got mine alot cheaper!! hahaha)

http://cgi.ebay.com/ebaymotors/17-w...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

[LarsD]

If I am not mistaken those will fit best with 96+ spindles and ranger axles. If you use 94-95 spindles the width might be an issue. I, however, am not an expert by any means and could be wrong.

 

[Chuckman]

If I am not mistaken those will fit best with 96+ spindles and ranger axles. If you use 94-95 spindles the width might be an issue. I, however, am not an expert by any means and could be wrong.

they'll be fine with the 94/95 spindles. its the 96+ spindles that could have a problem because they move the wheels out more than the earlier ones.

for the rears, i run the ranger axles with my saleens (same width and offset) with no problems, and ive also seen straight 94-98 axles and disks work with that offset.

 

[1bad67sbf]

sounds great thanks for the help.