I'm missing the parking brake switch...

[88LX]

im wrapping up my 5 lug swap and finally installing the parking brake components and low and behold i cant find the parking brake switch. i know its not necessary for the fucntion but my question is: will a switch from a 94 work? i found one on rockauto for the 94 and later cars but nothing for the foxes.

http://www.rockauto.com/catalog/moreinfo.php?pk=932975

i dont remember what the fox one looks like, so i was hoping to just use this one. it looks like it would work. ill check the dealers this week. thanks for the help.

-adam

 

[Mustang5L5]

Well, that looks like it, but I haven't seen a fox switch in 2-3 years so not very sure


Sent from my iPhone 4S using Tapatalk

 

[CarMichael Angelo]

Worse case scenario you could always put a sensor in the brake line like I did. I had to when I raised the pivot point on my brake pedal.

 

[88LX]

well, thanks. ill probably just pick this one up. how different is the sn95 hand brake vs the fox one?

update:

i found this one too. can anyone comfirm? im not asking anyone to pull the center section of the console, unless they want to of course...otherwise im off to the junkyard.

http://www.mypartsgarage.com/wells-parking-brake-release-switch-sw4516.html

 

[jchav02]

I just finished my 5 lug conversion about a month ago I cant say for sure but they look very similar.

 

[88LX]

i ordered the piece from the second link, after a trip to the yard yielded no mustangs. i guess thats a good thing in a way. the ford dealer said its a discontinued piece.