• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Immobilizer Bypass Module

  • Thread starter Thread starter joey_corleone82
  • Start date Start date May 24, 2006
J

joey_corleone82

New Member
Mar 18, 2006
16
0
0
May 24, 2006
#1
  • May 24, 2006
  • #1
I had a viper 791 alarm put in. The shop used a DEI 556U bypass module, but it has given me problems from day one and they can't figure it out. What happens is once in a while intermittantly when I actually put the key in the starter to go start it, it does not read right, resulting in the theft light blinking fast and a crank/no start condition. If you play with it for a few times it works, and the remote start works.

I was under the impression that the bypass should not have effected the factory system when you use the key, only on remote start, so either they have something wired wrong, or it is the wrong module. Does anybody know any information about this?

I have a 2001 GT Convertible. Thanks you much!
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
May 24, 2006
#2
  • May 24, 2006
  • #2
Best thing to do would be to have that f'n aftermarket alarm system removed in my opinion. You can probably find some dumbass to buy it on eBay.
 

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
Syracuse, NY
May 24, 2006
#3
  • May 24, 2006
  • #3
hrmm..most times the bypass is only needed for autostart. fords anti theft is good for stoping theifs from starting/running the car. an aftermarket alarm would be good to protect stuff on the interior.

if you ditched the bypass and any ignition kill stuff from the aftermarket alarm you should be fine
 
F

ForPointSex

Founding Member
Mar 19, 2002
395
0
16
Mercer, NJ
May 24, 2006
#4
  • May 24, 2006
  • #4
Some places take the chip out of your key and stick it under the steering wheel column.
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
May 24, 2006
#5
  • May 24, 2006
  • #5
I have two problems with alrams and remote starts one is in general and one is for PATS equiped cars..

1. the hacks that install these alarms.. only the guys that wire up police cars are bigger hacks than these guys.. any wirring F-up you can think of I have seen atleast 100 times from these people.

2. the key that they put under the column makes the pats system usless. if they can turn the lock cylinder they can take your car if you have remote start.
 
J

joey_corleone82

New Member
Mar 18, 2006
16
0
0
May 25, 2006
#6
  • May 25, 2006
  • #6
The reason I had this system put in is because 1 week after I had my brand new stang on the road it was broken into and vandalized....stole both airbags right in a lit parking lot at work...and lets just say this company is a major global corporation. You are right though, I can't believe that the people that install these...I've had more problems and it's like they are just guessing on what to do. Not very reassuring. I love the alarm and the remote start, my only regretis not doing my homework on a shop with good people first.
 

topless98gt

Adhesive Feces
Mar 31, 2005
182
0
17
Arlington, TX
May 25, 2006
#7
  • May 25, 2006
  • #7
I've got the 791XV as well, along with the remote start, and the 556U isn't up inside the dash right now. I think since it's a manual, the installer took the ignition ring out when he hooked up my aux trunk switch. Anywho...the 556U isn't activated unless it gets a voltage from the brain saying that it's about to remote start. I once had the same problem you speak of, but I can't remember what it was. Try resetting the ECU by disconnecting the battery for a while. I think that's the only thing I did.
 
You must log in or register to reply here.

Similar threads

T
2002 V6 3.8L Help Me
  • TheIncompetentMechanic
  • Apr 4, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2 3
Replies
50
Views
674
1996 - 2004 SN95 Mustang -General/Talk- May 12, 2026
TheIncompetentMechanic
T
B
Resolved 1996 PATS help needed
  • Bajaboy
  • May 21, 2025
  • SN95 4.6L Mustang Tech
Replies
5
Views
495
SN95 4.6L Mustang Tech May 23, 2025
Bajaboy
B
8
Electrical Crank-no start ... no spark ... no injector pulse, was it something I did? (redux)
  • 85gtCOBRA
  • Oct 28, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
491
Fox 5.0 Mustang Tech Oct 29, 2025
85gtCOBRA
8
M
01 mustang 3.8 fuel pressure issue
  • Mhaley2006
  • May 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
52
1996 - 2004 SN95 Mustang -General/Talk- May 29, 2026
Mhaley2006
M
89 LX Electrical Troubles
  • fun331
  • Oct 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
321
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 27, 2025
fun331
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?