• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Injector Questions

  • Thread starter Thread starter Gotanks3646
  • Start date Start date Jul 18, 2005
G

Gotanks3646

New Member
Apr 7, 2005
1
0
0
Jul 18, 2005
#1
  • Jul 18, 2005
  • #1
I drive a 94 GT that is slightly upgraded with equal length headers, H-Pipe, cat back exhaust, 65mm TB, K&N Filter, Trickflow Street Intake, BBK fuel preasure regulator, MSD Blaster Coil, Mach Pulley set, 155lph fuel pump, & a smog delete. I am thinking about installing 24lb injectors and a 24lb MAF. My first question is, do I really need to upgrade to 24lb injectors?? If I do upgrade, how badly will it kill my gas milige (I get around 17 city right now)? Also, with this little of modifications will I even get any more power out of the engine? I dont plan on doing anything else to this engine so future planning is not an issue. Any suggestions would be great!
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Jul 18, 2005
#2
  • Jul 18, 2005
  • #2
First of all....WELCOME TO STANGNET

You dont "need" to upgrade with ht mods listed. You wont get more power from the injectors...the money would be better spent on a set of pulleys or put towards gears... The mileage will drop a little, but it depends on how you drive it.

RC


BTW...we say "slightly modded" not "upgraded"

GL!
 

stprorolla49

Active Member
Oct 9, 2004
1,455
15
39
Fairfield, CT/North Jersey
Jul 18, 2005
#3
  • Jul 18, 2005
  • #3
wont he get a few hp outta the aftermarket MAF?
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Jul 18, 2005
#4
  • Jul 18, 2005
  • #4
stprorolla49 said:
wont he get a few hp outta the aftermarket MAF?
Click to expand...
I assumed he was just gonna get a new calibration...but he may pick up a couple (insignificant IMO)

RC
 

final5-0

Mustang Master
Apr 6, 2003
6,817
12
79
DFW Texas
Jul 18, 2005
#5
  • Jul 18, 2005
  • #5
stprorolla49 said:
wont he get a few hp outta the aftermarket MAF?
Click to expand...

Yes he would ...... but the focus is on the word ...... "few".

I agree with RC in the fact that his $$$ would be better spent elsewhere.

If we are talking about ProM mafs ...........................................

A 19lb caled maf is not too good of an idea cause when you get to the point of needing larger inj's your maf needs to be recaled which just takes more of your money. And the sad part of the whole 19lb caled maf deal is that you only gained that "few" hp.

IMHO, the best gain for the $$$ spent is to upgrade the maf & inj's together.

Now if your gonna go with a C & L maf then that is a different story but my first choice ...... no strike that ...... my ONLY choice is ProM.

Later
Grady
 

CManT1914

New Member
Feb 5, 2004
3,172
2
0
Killeen, Texas
Jul 18, 2005
#6
  • Jul 18, 2005
  • #6
Do NOT get bigger injectors and a MAF. Your stock stuff is fine. An aftermarket set just adds more things to the car that can go wrong. 24's really aren't "needed" until you're pushing around 300hp usually.

EDIT: Oh yea, welcome to stangnet!
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Jul 18, 2005
#7
  • Jul 18, 2005
  • #7
final5-0 said:
...... no strike that ...... my ONLY choice is ProM.

Later
Grady
Click to expand...

 

final5-0

Mustang Master
Apr 6, 2003
6,817
12
79
DFW Texas
Jul 18, 2005
#8
  • Jul 18, 2005
  • #8
Well RC

If your gonna give this new guy a welcome.

Then I'm gonna tell him like it really is, lol!

Later
Grady
 
G

Green 94 5.0

Founding Member
Mar 25, 2002
2,601
12
79
Ft. Lauderdale, FL
Jul 18, 2005
#9
  • Jul 18, 2005
  • #9
until you install heads and a cam, you can get by with the 19's and a little bump in the fuel pressure. as far as the MAF goes, i would wait until you do the rest of the mods and need the injectors. as was said already, sending it out to be recalibrated and costing more money isnt worth the small performance gain you would get from making the MAF swap now.
 
You must log in or register to reply here.

Similar threads

N
Looking for ECU/CHIP for 1992 5.0
  • Nathan26
  • Sep 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
306
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 8, 2026
Qtrhrse23
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
Gt40 e303 combo questions
  • 99mustanggt2018
  • Mar 30, 2025
  • 1994 - 1995 Specific Tech
Replies
2
Views
537
1994 - 1995 Specific Tech Mar 30, 2025
KRUISR
1
Engine 91 mustang 302 Low acceleration car backfires pops and acts like it doesn’t want to take fuel
  • 1991Fox5.0
  • Oct 4, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
1K
Fox 5.0 Mustang Tech Oct 6, 2025
1991Fox5.0
1
Fox Xtremely high fuel consumption
  • PonyGTrider
  • Apr 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 9 10 11
Replies
213
Views
6K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 9, 2026
PonyGTrider
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?