Injector Questions????

91fxbdy

New Member
Aug 25, 2005
8
0
0
Orange County
A few months ago I purchased a 1991 5.0L. The guy I bought it from had no clue as to what had been done to the motor. It was stock except for headers and exhaust.

The car seems to be running extremely rich. The reason for this is that it backfires all the time and you can smell the fuel. The injectors and fuel rail look pretty much new. Is there a way to tell what PSI injectors they are? I have a feeling there are 26lb instead of the stock 19lb.
Any info would be helpfull.
 
Ford does not make 26lb, they may be 24's. Backfiring is caused by a lean condition, not rich. A lean condition will burn up the pistons. Running too rich will wash out the rings and cause the cylinder walls to become glazed. Take it to a pro, they will be able to diagnose ur problem and tell u what injector size they r. Ur injectors r probably leaking fuel.
 
What are the timing and fuel pressure like? And what color are the injectors? That'll get us started here, until someone else comes in. The injector color will tell us what PSI they're rated for.
 
Here ya go

91fxbdy said:
A few months ago I purchased a 1991 5.0L. The guy I bought it from had no clue as to what had been done to the motor. It was stock except for headers and exhaust.

The car seems to be running extremely rich. The reason for this is that it backfires all the time and you can smell the fuel. The injectors and fuel rail look pretty much new. Is there a way to tell what PSI injectors they are? I have a feeling there are 26lb instead of the stock 19lb.
Any info would be helpfull.

Get the part number off of the fuel injector and then use this website to give you the flow ratings for your specific injector:

http://www.witchhunter.com/injectordata1.htm

good luck
Ty
 
Dump the codes and see what the computer says is wrong…

Here's the link to dump the computer codes with only a jumper wire or paper clip and the check engine light, or test light or voltmeter. I’ve used it for years, and it works great.

See http://www.troublecodes.net/Ford/
OR
See http://www.mustangworks.com/articles/electronics/eec-iv_codes.html

IF your car is an 86-88 stang, you'll have to use the test lamp or voltmeter method. There is no functional check engine light on the 86-88's except possibly the Cali Mass Air cars.

Codes have different answers if the engine is running from the answers that it has when the engine isn't running. It helps a lot to know if you had the engine running when you ran the test.

Trouble codes are either 2 digit or 3 digit, there are no cars that use both 2 digit codes and 3 digit codes.

For those who are intimidated by all the wires & connections, see http://www.actron.com/product_detail.php?pid=16153 for what a typical hand scanner looks like. Normal retail price is about $30 or so at AutoZone or Walmart.

Or for a nicer scanner see http://www.midwayautosupply.com/detailedproductdescription.asp?3829 – It has a 3 digit LCD display so that you don’t have to count flashes or beeps.. Cost is $35.