• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Injector Questions????

  • Thread starter Thread starter 91fxbdy
  • Start date Start date Oct 28, 2005
9

91fxbdy

New Member
Aug 25, 2005
8
0
0
Orange County
Oct 28, 2005
#1
  • Oct 28, 2005
  • #1
A few months ago I purchased a 1991 5.0L. The guy I bought it from had no clue as to what had been done to the motor. It was stock except for headers and exhaust.

The car seems to be running extremely rich. The reason for this is that it backfires all the time and you can smell the fuel. The injectors and fuel rail look pretty much new. Is there a way to tell what PSI injectors they are? I have a feeling there are 26lb instead of the stock 19lb.
Any info would be helpfull.
 
3

304billet

Member
Sep 16, 2005
315
1
16
Oct 28, 2005
#2
  • Oct 28, 2005
  • #2
Ford does not make 26lb, they may be 24's. Backfiring is caused by a lean condition, not rich. A lean condition will burn up the pistons. Running too rich will wash out the rings and cause the cylinder walls to become glazed. Take it to a pro, they will be able to diagnose ur problem and tell u what injector size they r. Ur injectors r probably leaking fuel.
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Oct 28, 2005
#3
  • Oct 28, 2005
  • #3
What are the timing and fuel pressure like? And what color are the injectors? That'll get us started here, until someone else comes in. The injector color will tell us what PSI they're rated for.
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Oct 28, 2005
#4
  • Oct 28, 2005
  • #4
Backfiring could also be timing retarded too far, which would cause you to seem rich, also.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Oct 28, 2005
#5
  • Oct 28, 2005
  • #5
orange injectors are 19#

blue are 24#


get the codes read that will help you get started
 
C

craZy400

New Member
Jun 2, 2005
7
0
0
Nov 1, 2005
#6
  • Nov 1, 2005
  • #6
Here ya go

91fxbdy said:
A few months ago I purchased a 1991 5.0L. The guy I bought it from had no clue as to what had been done to the motor. It was stock except for headers and exhaust.

The car seems to be running extremely rich. The reason for this is that it backfires all the time and you can smell the fuel. The injectors and fuel rail look pretty much new. Is there a way to tell what PSI injectors they are? I have a feeling there are 26lb instead of the stock 19lb.
Any info would be helpfull.
Click to expand...

Get the part number off of the fuel injector and then use this website to give you the flow ratings for your specific injector:

http://www.witchhunter.com/injectordata1.htm

good luck
Ty
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Nov 1, 2005
#7
  • Nov 1, 2005
  • #7
Dump the codes and see what the computer says is wrong…

Here's the link to dump the computer codes with only a jumper wire or paper clip and the check engine light, or test light or voltmeter. I’ve used it for years, and it works great.

See http://www.troublecodes.net/Ford/
OR
See http://www.mustangworks.com/articles/electronics/eec-iv_codes.html

IF your car is an 86-88 stang, you'll have to use the test lamp or voltmeter method. There is no functional check engine light on the 86-88's except possibly the Cali Mass Air cars.

Codes have different answers if the engine is running from the answers that it has when the engine isn't running. It helps a lot to know if you had the engine running when you ran the test.

Trouble codes are either 2 digit or 3 digit, there are no cars that use both 2 digit codes and 3 digit codes.

For those who are intimidated by all the wires & connections, see http://www.actron.com/product_detail.php?pid=16153 for what a typical hand scanner looks like. Normal retail price is about $30 or so at AutoZone or Walmart.

Or for a nicer scanner see http://www.midwayautosupply.com/detailedproductdescription.asp?3829 – It has a 3 digit LCD display so that you don’t have to count flashes or beeps.. Cost is $35.
 
You must log in or register to reply here.

Similar threads

S
4.6 spitting o-rings out of 2 injectors
  • skidad
  • Sep 30, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2 3 4
Replies
78
Views
2K
1996 - 2004 SN95 Mustang -General/Talk- Nov 4, 2026
skidad
S
I
Engine Help requested in identifying how to resolve engine light issue
  • Ianslaney
  • Oct 4, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
183
SN95 4.6L Mustang Tech Oct 4, 2026
Bullitt347
J
Fuel Fuel Pressure Issue
  • justadude07
  • May 12, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
490
Fox 5.0 Mustang Tech May 12, 2025
justadude07
J
Electrical 88 EEC Injectors batch firing ?
  • Dustin 86GT
  • Dec 8, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
655
Fox 5.0 Mustang Tech Jan 8, 2026
gkomo
J
Engine Running like crap :(
  • justadude07
  • Sep 27, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
533
Fox 5.0 Mustang Tech Oct 19, 2025
DadLife0724
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?